Menu

Shop

Garage

Cart

Account

Product Summary

Chevy Small Block V8, Solid Flat Tappet Camshaft Type

  • Our solid flat tappet cams offer superior performance and the very best value
  • These grinds are tried and tested!
  • 0.026" Intake
  • 0.028" Exhaust

Key Specs

MFG. Part #91514103
Camshaft TypeSolid Flat Tappet
RPM Range2500-6250
Intake Duration287
Exhaust Duration297

Need To Know

Free Shipping on Orders Over $149

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Details

Our solid flat tappet cams offer superior performance and the very best value. These grinds are tried and tested!

Note: This cam is not drilled for an accessory drive. Many sprint cars use a fuel pump, power steering, or dry sump oil pump mounted to the rear of the engine which is driven off of the back of the camshaft. This requires that the cam be drilled and tapped for the drive spud. Our flat tappet cams DO NOT have this modification. (Our roller cams already have this modification incorporated when manufactured.)

If you are running a sprint or modified that uses a rear cam accessory drive and your local rules dictate that you run a flat tappet cam, you will have to take the cam to a competent machinist and have it drilled and tapped for the drive spud.

Item Details

Mechanical - good for street stock stock bomber type car, excellent low end torque, pulls heavy car off the corner well. Works well with 2 bbl carb.

Charts

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #91514103
BrandSpeedway Motors
Camshaft TypeSolid Flat Tappet
RPM Range2500-6250
Intake Duration287
Exhaust Duration297
GENERAL
Intake Duration (.050" Lift)255
Exhaust Duration (.050" Lift)265
Lobe Separation106 °
Sold in QuantityEach
NotesDuration at .020" is 290 intake, 300 exhaust. Valve lash on this cam is .026" hot.