|
#91315920
$67.99
/kit
In Stock
$69.36
Save $1.37
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Comes as a Kit
View Kit Components
Need help?
855.313.9176Quick and Easy Returns
Return PolicyIncludes aluminum 3.250" mandrel drive, spacer, end cap, 6" bolt and key stock. S/B Chevy. 5 pieces. Hold from one pulley up to 3 pulleys.
| KEY SPECS | |
|---|---|
| MFG. Part # | 91315920 |
| Brand | Speedway Motors |
4.6
11 Reviews
Customers appreciate the product's flexibility, with many noting its adaptability for a variety of front drive applications. The product has been praised for its precise fit and its ability to rotate accurately on the crank. Users also highlighted its practicality in handling vacuum pump on drag cars and other engines. Minor issues with machining tolerances were reported by a customer, requiring some sanding for fitting. However, the majority agreed on its high-quality parts and great value. Overall, recommendations point towards the product being a cost-effective, reliable solution for driving a pump.
4.6
11 reviews
5
10
4
0
3
0
2
0
1
1
Most Liked Positive Review
5.0
saves over buying individually
Though I can't comment about it's intended use as I modified it for another engine, it's a collection of quality parts that are needed for driving a pump. Quick shipping and typical excellent speedway service is icing on the cake.
Most Liked Negative Review
1.0
Poor Machining Tolerances
Neither the woodruff key or the key stock that was provided with the mandrel fit into the machined keyways. Also, the od on the mandrel that fits into your balancer/pulley bore was too large. I spent about an hour sanding down the key's and mandrel before I could install it.
Filter by Ratings
Yes
5.0
2 months ago
Jim C
Michigan
Verified
Simplest installation
Would Recommend
Would buy again
5.0
4 years ago
Brian B.
Chino Valley AZ
Verified
This gives you the ultimate flexibility for pulley size and spacing, whatever water pump you use or any other accessory for that mater. I needed a very small pulley for my vacuum pump and this did the trick.
Would Recommend
Works for a Variety of Front Drive Applications
5.0
4 years ago
Racer
Midwest
Verified
Can be adapted to many 1" front drive mandrel applications.
Would Recommend
Yes I would definitely buy this again
5.0
5 years ago
Ken.
Glen Burnie MD
Verified
It worked out great. I just had to sand the paint off lightly where it goes into the balancer. Other than that it worked out just great
Would Recommend
All the pieces worked great together for my crank pully and
5.0
7 years ago
Big Daddy
Shelbyville, In.
Verified
Bolts up and fits properly. Spins true on the crank.
Would Recommend
Water pump drive kit
5.0
7 years ago
Shaun
Lebanon Pa.
Verified
Always Great Service Fast Shipping
Would Recommend
I would buy this product again
5.0
8 years ago
Coalminer
Madisonville ky
Verified
Hooked pulley to run a vaccum pump on a drag car cut it to length I needed and worked great recommend to anyonr
Would Recommend
Works as it should
5.0
10 years ago
Tee
Mobile ,alabama
Verified
Used with sbc and procharger
Would Recommend
Poor Machining Tolerances
1.0
13 years ago
FlatTire
Dallas, TX, USA
Neither the woodruff key or the key stock that was provided with the mandrel fit into the machined keyways. Also, the od on the mandrel that fits into your balancer/pulley bore was too large. I spent about an hour sanding down the key's and mandrel before I could install it.
Would Not Recommend
saves over buying individually
5.0
13 years ago
boosted
Undisclosed
Verified
Though I can't comment about it's intended use as I modified it for another engine, it's a collection of quality parts that are needed for driving a pump. Quick shipping and typical excellent speedway service is icing on the cake.
Would Recommend
Showing 10 of 11 reviews
2 Questions • 4 Answers
Can this be used in conjuction with a single V-belt pully on the balancer? Thank you.
by Gern
• 9 years ago
3 answers
View Answers
What size is the shaft? Will 1" bore pulleys with 1/8" keyways fit.
by Chevy85
• 11 years ago
1 answer
View Answer
2 of 2 questions shown
