Small Block Chevy Aluminum Box Oil Pan, Pickup and Pump

Oil Pan

This Kevko Racing 1097 AISP Aluminum Box Oil Pan features billet ends and rails. It bolts through tubes on the right side and has circle track gating, removable tray, level plug, and temp fitting.

The 1097 uses the reverse mount starter only. Available in standard rail width. This pan installs with no gasket, you can use silicone.

 

Oil Pump

These high volume performance oil pumps feature a 25% increase in flow over stock using Melling exclusive helical asymmetrical pump gears. The design of the gears provides for a significant reduction in the pressure ripple (pulsing) found in spur gear pumps. The reduction in the pressure ripple improves the wear and performance of the components assembled to the pump. The intermediate shaft and distributor gear wear will be reduced along with improvements in the performance of the distributor, less spark scatter. Included with the pump is the 12550 Chrome-Moly intermediate shaft with steel guide along with a lower pressure relief spring.

• High volume output- 25% more flow than stock
• Exclusive asymmetrical helical gears
• Significant reduction in pressure ripple (pulsing)
• Reduction in torque ripple in pump drive
• Improved distributor operation- reduction in spark scatter
• Improved distributor gear and intermediate shaft wear
• Includes 12550 chrome-moly intermediate shaft with steel guide
• Uses 5/8" diameter press fit screen
• 5/8" diameter pick up tube

 

Kit Includes

(1) Kevko 1097AISP Aluminum Box Oil Pan

(1) Melling 10550ST High Volume SB Chevy Oil Pump, 5/8 Inch, Stage 1

(1) Kevko 1006 Oil Pump Pick-Up Tube, 7 Inch