|
#91032916
$116.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
1 Groove Count, 5.96" Outside Diameter, Aluminum
| MFG. Part # | 91032916 |
| Groove Count | 1 |
| Outside Diameter | 5.96" |
| Power Steering Pulley Attachment | Bolt on |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyPower steering pump pulley for use with short-style (1955-1968) water pumps. Available in plain billet only.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91032916 |
| Brand | Speedway Motors |
| Groove Count | 1 |
| Outside Diameter | 5.96" |
| Power Steering Pulley Attachment | Bolt on |
| Material Type | Aluminum |
| Finish | Natural |
| GENERAL | |
| Overall Thickness | 2.00" |
| Belt Type | V-Belt |
| Inside Diameter | .63" |
| Offset | 1.25" |
| Belt Width | .38" |
| Sold in Quantity | Each |
| Notes | 2.00 INCH OVERALL HEIGHT CENTER HUB THICKNESS .75 INCH BACK OF HUB TO OD OF PULLEY 1.25 INCH |
4.3
7 Reviews
Customers have found our product to be of high quality, practical, and a great addition to their vehicles. They commend the product for its first-rate parts and easy installation, even in tight spaces. Some have stated that the pulley helped resolve alignment issues, albeit with necessary adjustments, reflecting the product's adaptability. However, the product may require minor modifications for an exact fit, increasing its versatility in various applications. A few users have commented on its price and plain appearance, but overall, customers consider our product as an effective, high-quality solution compared to other brands.
4.3
7 reviews
5
5
4
1
3
0
2
0
1
1
Filter by Ratings
I would purchase these parts form Speedway again.
5.0
5 years ago
One Speed
Lake Wales Florida
Verified
The power steering parts were first class parts. My 1936 Chevy Pickup was not designed for large radiators, electric fans. SBC engine, power brakes. Naturally it had to have power steering and it was very close for space. I have an original Mustang II front cross member and I had to do a little modification for the mounting. Only negative part of the installation is I have to remove the belt to remove the fill cap under the bracket for the alternator. I can live with that.. .
Would Recommend
Great product
5.0
6 years ago
Tom S
Johnstown NY
Verified
Simple easy to install looked great
Would Recommend
Problem Solver
4.0
7 years ago
34 Chevy PU guy
Jax/Jasper Fl
Verified
Had belt alignment issue after purchasing ALL matching "BILL'S" mounting brackets AND pulleys for Alt and PS on my SBC with Long pump, and 3 groove crank pulley. This pulley solved that problem, putting the PS belt on the 3rd (closest to engine ) groove where it should be. My only negative comment on pulley is that it appeared to be overpriced as compared to all other PS pulleys, especially considering it's plain appearance, and "Speedway" Brand.
Would Recommend
easy to fit good quality product.
5.0
8 years ago
Barney
Nanoose Bay BC Canada
Verified
Offset was correct for my application tho shimming was required for exact fitment.
Would Recommend
Almost perfect
5.0
9 years ago
Dan
Anaconda MT
Verified
Had to modify it slightly to make it fit, my set up, but that's why they call it hot rodding. Had to drill out the back a little, so it would slide on the shaft further.
Would Recommend
very well done pulley
5.0
11 years ago
abone
Fort Myers, FL, USA
Verified
This was an easy install of a product that fit well and looks good
Would Recommend
puzzled
1.0
12 years ago
niff
Undisclosed
Verified
I could not get this pulley to work with PS pump 91032908. Pulley stuck out way passed the third pulley on crank.
Would Not Recommend
Showing 7 of 7 reviews
1 Question • 1 Answer
what is the pump thickness from block to end of shaft?
by
• 15 years ago
1 answer
View Answer
1 of 1 questions shown
