|
#91667920
Starting from
$117.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyFabricated from 1/4" mild steel with stainless/chrome Allen head hardware. Simple installation; all brackets are pre-assembled. Drilling or tapping is not required. Attaches to the lower left front of the block using the two lower bolt holes located by the timing cover (the old front motor mount holes). The adjusting arm mounts to the lower water pump hole.
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Finish to see |
| Brand | Bills Hot Rod Co |
| Mounting Side | Driver Side |
| GENERAL | |
| Material Type | Mild Steel |
| Finish | Raw Machined |
| Color | Black |
| Hardware Included | Yes |
| Sold in Quantity | Set |
| Notes | Works with both Short and Long water pump. |
| Water Pump Style | Short/Long |
4.8
30 Reviews
Customers commend the product, particularly for its premium quality, exemplary finish, and excellent machine work. The bracket is easy to install and it provides a good fit with different engine setups. Many users prefer it over cheaper alternatives due to its durability and functional design. They also appreciate its multiple mounting options and its compatibility with various car models. However, some users reported a need for slight modifications to achieve perfect alignment. Nonetheless, many confirm that they would purchase this product again, highlighting its clear superiority over other brands.
4.8
30 reviews
5
27
4
2
3
0
2
0
1
1
Most Liked Positive Review
5.0
The part worked perfectly
This unit was installed in my 1964 Jeep Gladiator with a Blue Print SBC 383. The original stamped steel upper arm failed allowing the power steering unit to loosen up and fell out of the engine bay onto the front axle. I chose this mounting system to replace it, and it looks better than the original and worked perfectly. I will admit I modified the upper arm of the bracket so that it mounted closer on the block to the power steering unit, but that was my choice. The overall result was total success!
Most Liked Negative Review
1.0
Does not work with Speedway alternator bracket.
I tried using the product with the Speedway alternator bracket. The full hole on the PS pump hits the bottom of the bracket. The belt for the alternator rubs the tension bracket and bolts for mounting the ps pump.
Filter by Ratings
Excellent bracket for the price
5.0
7 months ago
Dirty Dog
Loxahatchee, Fl
Verified
Easy to install and looks great on the engine
Would Recommend
Very nice product
5.0
a year ago
55 IH
Arkansas
Verified
If purchasing and mounting AC Get the 1200 series. The cap screw at the bottom interferes with the belt for the alternator. Found the out the hard way and hoping this helps someone else. Great product
Would Recommend
I would buy again
5.0
2 years ago
Crew chief
Charleston SC
Verified
The bracket fit perfect on 383 with no issues
excellent quality and finish
5.0
2 years ago
Rino
Agawam
Verified
Installed on SBC with long w/pump and stock pulleys. I had to add spacer washers to align pump pulley correctly. Otherwise, happy with quality and install.
Would Recommend
SBC alternator bracket
5.0
3 years ago
Lapdog55
Doylestown, Pa
Verified
Great product with nice quality machine work and installation parts
Would Recommend
P/S mtn. bracket
5.0
3 years ago
Billy Boy
Navarre,Fl.
Verified
worked great,looks good & easy to install
Would Recommend
Does not work with Speedway alternator bracket.
1.0
3 years ago
Steveb
Colorado
Verified
I tried using the product with the Speedway alternator bracket. The full hole on the PS pump hits the bottom of the bracket. The belt for the alternator rubs the tension bracket and bolts for mounting the ps pump.
The part worked perfectly
5.0
3 years ago
Smokin
Middle Utah
Verified
This unit was installed in my 1964 Jeep Gladiator with a Blue Print SBC 383. The original stamped steel upper arm failed allowing the power steering unit to loosen up and fell out of the engine bay onto the front axle. I chose this mounting system to replace it, and it looks better than the original and worked perfectly. I will admit I modified the upper arm of the bracket so that it mounted closer on the block to the power steering unit, but that was my choice. The overall result was total success!
Would Recommend
This PS Pump was easy to install
5.0
4 years ago
Don
Ogden Utah
Verified
This PS Pump compliments my March set up on the front of the engine and has worked well, so hopefully this is my 4th and last PS pump.
Would Recommend
i would buy again
5.0
4 years ago
none
council bluffs ia
Verified
i mounted high worked great 1950 on a s10 frame 400 small block
Would Recommend
Showing 10 of 30 reviews
8 Questions • 9 Answers
What power steering mount would you use for a 327 small block front motor mount?
by Brent
• 8 years ago
1 answer
View Answer
Can you please advise what type of alternator bracket should be used with this setup? I have a 1965 283 which uses the drivers side top water pump bolt to support/tension the alternator. However I also have aftermarket heads which have holes tapped in them for accessories. Ultimately I need to know which power steering pump bracket, alternator bracket, and pulleys are required when planning to mount the alternator on the drivers side
by Bill
• 8 years ago
1 answer
View Answer
Will this mounting bracket work to mount a Maval Ford/Mustang II Low Flow Plain Power Steering Pump with remote reservoir to a chevy 283 with short water pump? It is currently mounted to a chevy small block utilizing a bracket with a swivel that I do not like. The fan belt is using the third crankshaft pulley slot closest to the radiator. The part number for the power steering pump is 91032924-PLN.
by Marty
• 8 years ago
2 answers
View Answers
Will this bracket work for older 350 that's now a stroker ? I have an 8 inch balancer. I've got a variety of pumps but the return hose fitting on 69 Chev pickup pump heads in the best direction for clearance. Picture looks like 8 inch balancer but pump is different.
by KC+BA
• 8 years ago
1 answer
View Answer
65 C10 with no existing power steering. unknown year of 327 however no top holes to mount pump. Does all older 327 have the lower holes and will it work?
by Dave
• 9 years ago
1 answer
View Answer
What aluminum or chrome steel pulley will work with this mount (#91667920) and align with the forward most groove in your 3 groove pulley (#91015480) ? Thanks!
by Dick
• 10 years ago
1 answer
View Answer
Will this work on a 98'votec crate motor with LONG water pump to put power steering low on drivers side in my 68'nova?
by Dan
• 11 years ago
1 answer
View Answer
will this fit on my 350 small block with a short corvette water pump. will it hold the factory power steering pump
by Crazyrays
• 11 years ago
1 answer
View Answer
8 of 8 questions shown
