Shiftworks SW280-RCT-06 Automatic Trans Floor Mount Shifter

Shiftworks SW280-RCT-06 Automatic Transmission Floor Mount Shifter

This new Shiftworks floor shifter has been designed to properly function with whatever GM transmission you decide to use in your vehicle. Great care was taken to replicate the original look of the T-Handle shifter used by Chevrolet. Once installed in a factory console it will appear to be an original.

The shifter uses a rod linkage just like the factory shifter did, but utilizes right and left hand thread so you can make your final adjustments with a simple twist of the rod. Also, since this shifter mounts flush with the floor for console clearance, your able to use this shifter in almost any custom application as well.We even install and set up a new neutral safety / back up light switch so it's ready to simply wire into your car!

Powerglide transmissions use a variety of Range Select Shafts.  The use of any console shifter requires the transmission be able to accept the proper Range Select Lever for that particular shifter and/or shaft.  Shiftworks® offers several products that allow you to make this connection regardless of what Powerglide you may have. Click here to learn what you may need.

For 6-Spd Automatics, know that you cannot manually select all 6 gears of your transmission with the shifter. The 6L80E/6L90E's shift pattern is P_R_N_D_M. The "M" position tells the transmission to look for an electronic input (ex. steering wheel paddle shifters / buttons) on how and when to shift up or down. Putting the shifter in "D" or "Drive" will allow the transmission to operate through all gears on it's own based on what the computer tells it to do.

• Shifter assembly
• Optional shifter arm offsets
• Transmission shift lever
• Adjustable rod linkage complete with ball joints
• Neutral safety / back up light switch
• Dust Cover
• Console Slider

• 1967 Camaro
• 1966-1972 Nova
• 1967 Malibu