|
#91007123
Self-Ejecting Quarter Turn Fasteners, .500 Inch Grip, Pack/10
- Ten per package
- Cadmium plated steel
- .500"
$34.99
/bag
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 1.06" Centerline of Holes, 0.5" Reach
- Ten per package
- Cadmium plated steel
- .500"
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91007123 Details
Speedway Motors 91007123 Details
Flush mounting, self-ejecting panel fasteners. Zinc plated steel with 5/16" shank. These 1/4 turn fasteners come in a package of 10.
Use .500" grip length for thin materials, .700" grip length for thicker materials.
Charts
Measurement Guide (JPG)
Guides & Documents
Speedway Motors 91007123 Specifications
Speedway Motors 91007123 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91007123 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Zinc Plated |
| GENERAL | |
| Fastener Style | Slotted Flush Head Self Eject |
| Centerline of Holes | 1.06" |
| Reach | 0.5" |
| Shaft Diameter | 0.31" |
| Sold in Quantity | Bag |
| Notes | Bag of 10. |
Ratings & Reviews
4.6
15 Reviews
Customers affirm that our product excels in essential features such as usability, material quality and safety. The fasteners have been effectively used on drag cars, dune buggies, and engine covers, proving their versatility and practicality. The fasteners are easy to install and secure well when aligned correctly, outperforming aluminum alternatives. Despite some slight changes in quality over time, they still function as intended. However, a careful installation is required for optimal usage. Most customers would purchase again, highlighting its superiority to competitor products.
Ratings & Reviews
4.6
15 Reviews
Customers affirm that our product excels in essential features such as usability, material quality and safety. The fasteners have been effectively used on drag cars, dune buggies, and engine covers, proving their versatility and practicality. The fasteners are easy to install and secure well when aligned correctly, outperforming aluminum alternatives. Despite some slight changes in quality over time, they still function as intended. However, a careful installation is required for optimal usage. Most customers would purchase again, highlighting its superiority to competitor products.
4.6
15 reviews
5
11
4
3
3
0
2
1
1
0
Most Liked Positive Review
5.0
worked as pormised
just like most quarter turn fasteners - they work when everything is lined up well. I did have one get a little wonky on assembly. When I tried to force it, it bent the jaws of the fastener (which I would rather have than just having the jaws break off like the aluminum ones). I was able to tweak everything and all my panels are fitting nicely and the fasteners work like a champ.
Most Liked Negative Review
2.0
Quality has gone down
I bought the same part number a few years ago and they were tough and heavy duty. These fasteners are cheap compared to the original ones. If the retaining spring is not close enough the fastener will spread open and get stuck. Trying to squeeze it back in place with pliers will just break the fastener and you have to start over. Don't get me wrong the product works to it's intended purpose its just not as good as the older ones.
Filter by Ratings
Yes
5.0
4 months ago
Mack
Stevenson Alabama
Verified
Great fit
Would Recommend
These are my go to places for all of my hardware needs
5.0
5 months ago
Fasterat
St. Louis
Verified
Use on all of my racing builds. No complaints whatsoever
Would Recommend
I would buy this product again
5.0
4 years ago
Ed
Yosemite CA
Verified
Used fasteners on my drag car.
Would Recommend
I will buy again
4.0
6 years ago
Veronica
Whiteville nc
Verified
It's a great product
Would Recommend
The fasteners work great.
5.0
6 years ago
Mike
Michigan
Verified
The fasteners secure the fiberglass body to the dune buggy frame. They do the job great!
Would Recommend
I like the look
5.0
7 years ago
Sam
Dearborn,mi
Verified
I'll use these for final assembly
Would Recommend
Perfection
5.0
7 years ago
Ricky C.
South Houston, TX
Verified
Easy to Install. I used it on my Transmission Tunnel Cover.
Would Recommend
I would purchase this product again
5.0
7 years ago
GB
Lynchburg Va
Verified
NONE
Would Recommend
I would buy this item again
5.0
7 years ago
Mr Anglia
Prince Edward Island, Canada
Verified
I used the item on my engine cover and works great
Would Recommend
I would buy again.
5.0
8 years ago
Webbco
Hutchinson Kansas
Verified
Pretty much a standard quarter turn fastener. Got here fast.
Would Recommend
Showing 10 of 15 reviews
Questions & Answers
4 Questions • 6 Answers
Questions & Answers
4 Questions • 6 Answers
what are the recommend plates an springs
by mike
• 11 years ago
1 answer
View Answer
What size solid rivet is required for installation?
by Mpmike
• 11 years ago
2 answers
View Answers
do the fasteners have all the parts that they lock into?
by
• 15 years ago
2 answers
View Answers
What is the "grip length" of these fasteners? I have a total material thickness of .150" and my tabs are .060" thick. Thanks
by Jonny O
• 15 years ago
1 answer
View Answer
4 of 4 questions shown