|
#91001504
$17.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 0.625" Hole Diameter, Rubber
| MFG. Part # | WS6250 |
| Hole Diameter | 0.625" |
| Inside Diameter | 0.625" |
| Material Type | Rubber |
| Overall Width | 1.25" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.
For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | WS6250 |
| Brand | Seals-It |
| Hole Diameter | 0.625" |
| Inside Diameter | 0.625" |
| Material Type | Rubber |
| Overall Width | 1.25" |
| Overall Thickness | 0.0495" |
| GENERAL | |
| Notes | 1 set does 3 heims, so 6 pieces in set. |
| Sold in Quantity | Set |
4.8
30 Reviews
Customers find the product extremely practical and reliable, confirming it efficiently keeps dirt out of rod ends, hiem joints, and 4 link suspensions. Users noted it as essential for extending the longevity of mechanical components like heim joints. The product has been utilized in various projects from cars to specific components like strut rods, showing its versatility. Considering the product's performance, some users were willing to purchase it again. Despite reports of the product splitting after a few years, overall, customers were satisfied with its quality, effectiveness, and users highlighted its perfect fit and ease of use. Customers recommend this product for its important role in vehicle maintenance and its high quality compared to other products on the market.
4.8
30 reviews
5
26
4
3
3
1
2
0
1
0
Most Liked Positive Review
5.0
You NEED to use these.
Like everything that Speedway carries, these seals work as advertised. With out these seals Spherical rods ends on steering components have a short life span on a street car - With these seals they keep out the grit and your grease doesn't was out instantly. I don't even look at my ends anymore.
Most Liked Negative Review
3.0
Not durable
Bought these to protect heim joints on a project car. They seem to work well, but i'm disappointed that they only lasted a few years and started splitting on a project that had not yet been completed. Had to replace them before i even drove the car.
Filter by Ratings
I have used before and work great.
5.0
10 months ago
Mr. Fixit
ssi, Georgia
Verified
Finish the heim joint off perfectly and looks good.
Would Recommend
Yes
5.0
a year ago
ACE
Louisville KY
Verified
These seal the dirt out of heim joints very well.
Would Recommend
Keeps Heim joints clean.
5.0
a year ago
Rurnt
Mountains of West Virginia
Verified
Easy to install and they completely cover the rod-end. The car is rarely driven in the rain; I purchased these as insurance.
Would Recommend
Nice touch
5.0
3 years ago
Wd45gto
Monroe MI
Verified
Hopefully these will help my hiem ends last longer keeping dirt out
Would Recommend
Does what it is supposed to
5.0
4 years ago
John
Maine
Verified
Helps keep dirt out of rod ends.
Would Recommend
I have no problem buying this product again
5.0
5 years ago
CJ
Australia
Verified
Used these on panhard bar works great.
Would Recommend
Not durable
3.0
5 years ago
Sneaky Pete
Bristol, CT
Verified
Bought these to protect heim joints on a project car. They seem to work well, but i'm disappointed that they only lasted a few years and started splitting on a project that had not yet been completed. Had to replace them before i even drove the car.
Would Recommend
Just what I needed
5.0
5 years ago
Jeremy
Henderson NC
Verified
These look nicely made. Have yet to install but I'm sure they will be just fine.
Would Recommend
Worked perfectly
5.0
6 years ago
Wheelman167
Vero beach Fl
Verified
I bought these for the heim joints on my 240sx suspension arms. They fit perfect and keep dust and dirt out of the heims.
Would Recommend
DIY adjustable strut rods
5.0
6 years ago
Amiamso
Yuba City CA
Verified
This product worked great for my project. I'm building adjustable strut rods for a 65 Ranchero.
Would Recommend
Showing 10 of 30 reviews
Be the first to ask a question.
