Menu

Shop

Garage

Cart

Account

Product Summary

H-Beam Connecting Rod Type, Floating Wrist Pin Style

    See more details

    Key Specs

    MFG. Part #2-350-6000-2000-QLS
    Connecting Rod TypeH-Beam
    Connecting Rod MaterialForged 4340 Steel
    Connecting Rod Length6.000"
    Wrist Pin StyleFloating
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    Scat 2-350-6000-2000-QLS Details

    These steel H-beam rods are as light and strong as you can get at a price you can afford. They use 7/16" ARP 8740 bolts and will clear most stroker cranks and cams. They accept 2" small journal bearings, so double check your crank.

    • 6.0 Inch
    • 2 Inch Journal
    • 7/16 Inch Bolts
    • 569 Grams 

     

    CARB Warning

    For race/ off road use or for use on pre-1966 vehicles.

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    Scat 2-350-6000-2000-QLS Specifications

    KEY SPECS
    MFG. Part #2-350-6000-2000-QLS
    BrandScat
    Connecting Rod TypeH-Beam
    Connecting Rod MaterialForged 4340 Steel
    Connecting Rod Length6.000"
    Wrist Pin StyleFloating
    GENERAL
    Wrist Pin Diameter0.927"
    Rod Journal Diameter2.000"
    Connecting Rod Bolt Diameter7/16"
    Sold in QuantitySet
    Rod Crank End Width0.940"
    Weight569 grams
    GTIN Code846091045779
    Connecting Rod FinishShot-peened
    Clearanced for StrokerYes
    Cap Retention StyleCap Screw
    Connecting Rod Bolt BrandARP
    Connecting Rod Bolt Material8740 Chromoly Steel
    Fastener Yield Strength180,000 psi
    Connecting Rod Bolt Head Style12-Point
    Big End Bore Diameter2.125"
    Weight Matched SetYes
    New or RemanufacturedNew
    MagnafluxedYes

    Ratings & Reviews

    5

    2 Reviews

    Overall Assessment

    Customers highly recommend our product, particularly for high-performance modification on engines. They praise the unique design, including the lightening hole and well-machined h-beam, which also boasts of outstanding quality. The product's balance is also noteworthy, requiring minimal adjustment. Users are so satisfied that they intend to repurchase for other engine projects. Their preference for our product over others underlines its superiority in quality and practicality.

    5

    2 reviews

    5

    2

    4

    0

    3

    0

    2

    0

    1

    0

    Filter by Ratings

    I would buy those again

    5.0

    a year ago

    Bugman

    Mo

    Verified

    I'm building a 408 sbc with a 6-71 blower having about 750 hp

    Would Recommend

    Unique with excellant quality

    5.0

    11 years ago

    Jay62

    Carmel Valley, CA, USA

    Greetings, I'm using these rods in a bored and stroked 4.6 liter Rover V8. It's now 3.8 bore x 3.4 stroke (308cid# I've been building aluminum Buick/Olds/Pontiac/Rover V8's since 1970. It's a common high performance modification on these engines too use small block Chevy 2.0" journal rods. The big end has to be narrowed from .940 to .842. These rods are very unique with the lightening hole, and the h-beam is light and very well machined. For my application they are perfect. They were very close when balanced with just 2 rods needing a small amount removed from the small end. Big ends were spot on. I'm buying another set for a 3.0 x 3.8" engine. #270cid# Thanks for the free shipping! J

    Would Recommend

    Showing 2 of 2 reviews

    Fitment

    • Gen 1 L79 Small Block Chevy

    • 327 Chevy Small Block V8

    • Gen 1 L79 Small Block Chevy

    • Gen 1 L79 Small Block Chevy

    • Gen 1 L76 Small Block Chevy

    • Gen 1 L79 Small Block Chevy

    • Gen 1 L79 Small Block Chevy

    • Gen 1 L79 Small Block Chevy

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • 327 Chevy Small Block V8

    • Gen 1 L76 Small Block Chevy

    Customer Impersonation Script