Rocket Racing Solid-Fire Lug Cover-Knockoff Assembly Kit, Flat Angle Spinners
Universal Fit, Aluminum, Gray
This Fire-Solid lug cover assembly set from Rocket Racing Wheels requires open ended conical lugs with a 3/4" hex to avoid clearance issues. The lug cover is attached with a threaded adapter that locks in the o-ring seat and pair of vintage knockoffs. Choose a polished or painted gray finish.
- Choose Polished or Painted Gray
- Sold as a Set
- Covers 2 wheels
- Threaded Adapters
- Polished Flat Angle Spinners
- (1) Left Hand threaded adapter
- (1) Right Hand threaded adapter
- (1) Left Hand Polished Vintage Knockoff
- (1) Right Hand Polished Vinage Knockoff
- (1) Pair of lug covers
Note: These lug cover/knockoffs require open ended conical lug nuts with a 3/4" hex to avoid clearance issues. Open End Lugs Sold Separately.
Please note that this lug-cover knock off Kit will only fit and work in conjunction specifically with the Rocket 'Solid' & 'Fire' line of wheels. It is NOT universal, as the retaining center piece is very specific to the Rocket Solid & Fire line of wheels. The O/D of the threaded tube is 2.758" and is machined specifically to fit the I/D of the Solid & Fire line of wheels. There is a step machined on the back of the wheel to retain the threaded tubes.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Rocket Racing Solid-Fire Lug Cover-Knockoff Assembly Kit, Deep Angle Spinners
Rocket Racing Wheels RC1-01501 Polished Dome Center Cap
Rocket Racing Wheels RC1-01401 Chrome Center Cap
Rocket Racing Wheels RC0-01601 Center Cap, As-Cast Finish
Rocket Racing Wheels RB1-0201 Rocket Bullet Center Cap, Polished
Rocket Racing Wheels RB4-0202 Rocket Bullet Center Cap, Chrome
Rocket Racing Wheels RBM-0203 Rocket Bullet Center Cap. Cast
Rocket Racing Wheels TTF1-01801 Track and Touring Flat Cap
Rocket Racing Wheels RCM-01701 Rocket Center Cap, Cast
Snap-On Moon Cap, 13 Inch Wheel Cover
Q & A
Our new 383 engine gets installed in the '32 Roadster. We also update the steering wheel, shift knob/adapter, and wheels and tires. It's got some real 1960's flair now!
Learn how to measure offset, torque specs, design, and other wheel basics. Our racing wheel guide covers all you need for a new set of oval track wheels.
Roadster Expert Tim covers the various types of vintage wire wheels (1928-1935) found on early Fords and how to distinguish the differences between them.
Follow these easy step by step metal valve stem installation instructions. Steel bolt in valve stems are a more reliable way to keep the air in your tires.
This article clears up any confusion there may be when determining the front and rear wheel offset measurements for a Sprint car.
Learn how to rebuild a brake on a 3rd gen Camaro. Follow this guide on how to install and align bearing races without damage.
Advantages of using Speedway Motors weld-on rear disc brake kit for a Ford Nine-Inch rear end. Learn some tips for installation. This kit includes IMCA approved brake calipers.