Ridetech 12122650 Front SLA Suspension Kit, 79-93 Mustang

#76812122650

Ridetech 12122650 Front SLA Suspension Kit, 79-93 Mustang

Incorporates an upper control arm to induce much needed negative camber gain.
Caster, roll center, bumpsteer and Ackerman angles are optimized.
Bolt-in frame surrounds create attachment points for the upper control arms and the shocks, this keeps the load on the frame rails for maximum strength and reduced NVH.

$3,650.00

Factory Shipped

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

79-81 Ford Mustang

Incorporates an upper control arm to induce much needed negative camber gain.
Caster, roll center, bumpsteer and Ackerman angles are optimized.
Bolt-in frame surrounds create attachment points for the upper control arms and the shocks, this keeps the load on the frame rails for maximum strength and reduced NVH.
Upper and lower arms feature Delrin bushings infused with Teflon to minimize stiction and eliminate the need for lubrication.
Spindles includes Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance.

See more details

Key Specs

MFG. Part #	12122650
Brand	Ridetech

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Ridetech 12122650 Details

This bolt-in SLA (Short-Long-Arm) suspension system replaces the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. Compatible with either Ridetech Coil-Overs or Shockwave air suspension (sold separately).

Features

Incorporates an upper control arm to induce much needed negative camber gain.
Caster, roll center, bumpsteer and Ackerman angles are optimized.
Bolt-in frame surrounds create attachment points for the upper control arms and the shocks, this keeps the load on the frame rails for maximum strength and reduced NVH.
Upper and lower arms feature Delrin bushings infused with Teflon to minimize stiction and eliminate the need for lubrication.
Spindles includes Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance.
Lower control arm design improves tire clearance and steering angle, 30 degree’s with up to a 275mm wide tire.

Fitment

Fit’s many Aftermarket K-Members including Maximum Motorsports, Team Z, AJE & UPR.
Uses S550 (15-23) or SN95 (94-04) Mustang brake systems. (Caliper brackets sold separately.)
17″ minimum wheel diameter.
Compatible with stock and most aftermarket sway bars.

Specifications

Negative Camber Gain – 1.25 deg./in.
Positive Caster – 7-9 deg.
Bump steer – under .050″ (Optimized with Maximum Motorsport and Team Z k-members)
Lowers ride height 1-2″
50lbs lighter than stock suspension
Stock track width

Charts

Installation Instructions (PDF)

Guides & Documents

Front/Rear Suspension Kits Installation Instructions (76812122650)

CA Prop 65

Ridetech 12122650 Specifications

KEY SPECS
MFG. Part #	12122650
Brand	Ridetech

GENERAL
GTIN Code	840123517692

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.

Fitment

1979-1981 Ford Mustang