|
#60598767HD
Ram Clutches 98767HD Clutch, Jeep 10.5 X 1-1/16-10 Borg & Beck
$549.00
/set
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select an engine to verify Fitment
Select Engine
|
#60598767HD
$549.00
/set
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
| Input Spline Quantity | 10 |
| Input Shaft Diameter | 1.063" |
| Diameter | 10.5" |
| Friction Material | Metallic |
| Disc Style | Full face |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySTREET AND COMPETITION PERFORMANCE TO 650 HORSEPOWER
?POWERGRIP HD is a true “strip/street” competition clutch system that can handle the rigors of weekend racing and spirited street driving. This system has the same components as standard POWERGRIP above with the exception that the disc friction surfaces are both sintered metallic. Sintered metallic provides a degree of slippage on vehicle launch to prevent the violent and uncontrollable engagement characteristics of paddle type metallic discs. This firm consistent engagement is easy to control. Some chatter is likely on engagement with rear gearing less than 3.73 in street applications. Each set includes the pressure plate, clutch disc, release bearing, and alignment tool unless otherwise noted. Use Powergrip HD for power levels to 650 horsepower, or lower powered vehicles that see frequent track duty.
Clutches, Flywheels and release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection.
For a full list of warranty information please see our warranty information here
Application
Charts
Instruction Sheet (PDF)
Guides & Documents
WARNING:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 98767HD |
| Brand | Ram Clutches |
| Input Spline Quantity | 10 |
| Input Shaft Diameter | 1.063" |
| Diameter | 10.5" |
| Friction Material | Metallic |
| Disc Style | Full face |
| Hub Style | Sprung |
| Throwout Bearing Style | Standard |
| Flywheel Included | No |
| Hardware Included | No |
| GENERAL | |
| Pressure Plate Style | Borg and Beck |
| Throwout Bearing Included | Yes |
| Alignment Tool Included | Yes |
| Pilot Bushing Included | No |
| Counterweight Assist | No |
| Sold in Quantity | Kit |
| Max Horsepower Rating | 650 |
| GTIN Code | 809009237055 |
| Spline Count | 10 |
| Shaft Diameter | 1.063" |
Be the first to ask a question.
1968-1970 AMC Ambassador
390 AMC V8
1968-1970 AMC AMX
390 AMC V8
1968-1970 AMC Javelin
390 AMC V8
1969 AMC Rambler
390 AMC V8
1968-1970 AMC Rebel
390 AMC V8