|
#605802410
$1,425.00
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
1.125" Input Shaft Diameter, 10.5" Diameter
| Input Spline Quantity | 26 |
| Input Shaft Diameter | 1.125" |
| Diameter | 10.5" |
| Friction Material | Organic |
| Disc Style | Full face |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyRAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
RAM Automotive stock replacement clutch sets are covered under a 1-year warranty. All performance and racing clutches and disc components are covered under a 30-day warranty, except RAM-98516 (this clutch has a 6000 Series disc and is considered a race application). There are absolutely no returns on flywheels.
Speedway Motors cannot facilitate the return of defective Ram Automotive Co. products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Ram Automotive Co. at +1 (714)-630-2764.CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 80-2410 |
| Brand | Ram Clutches |
| Input Spline Quantity | 26 |
| Input Shaft Diameter | 1.125" |
| Diameter | 10.5" |
| Friction Material | Organic |
| Disc Style | Full face |
| Hub Style | Sprung/Solid |
| Flywheel Included | Yes |
| Hardware Included | No |
| GENERAL | |
| Pressure Plate Style | Diaphragm |
| Throwout Bearing Included | No |
| Alignment Tool Included | No |
| Pilot Bushing Included | No |
| Flywheel Material | Billet aluminum |
| Counterweight Assist | No |
| Sold in Quantity | Each |
| Max Horsepower Rating | 750 |
| Notes | Flywheel features a 2.75 in. register. Features 300 Series disc. |
| GTIN Code | 809009383400 |
Be the first to ask a question.
