Ram Clutches 78160 Retrofit T-56 Hydraulic Bearing Kit
T56, 2.000" Compressed Length, 0.70" Travel
The T-56 bearing is designed for use in retrofit or custom applications with GM engines. Early engine applications require a transmission spacer with the T-56. Check with your transmission supplier. This kit contains all mounting hardware, fittings and remote bleeder. This bearing requires a 3/4 inch master cylinder.
- Retrofit or custom GM engine applications
- Early engines require transmission spacer
- Contains all hardware, fittings and remote bleeder
- Requires 3/4 inch master cylinder
Learn more about hydraulic release bearings and how to properly install them by reading our tech article. How to Install a Hydraulic Throwout Bearing.
Terms and Policy (PDF)
CAUTION: Please follow all installation instructions regarding installation and setup. Incorrect setup height will cause undue stress on the o-rings from being over travelled and may lead to a leak in the system. ONLY use Teflon tape to install the fittings or fluid leakage will occur. Please see videos for complete setup information.
STREET DUAL DISC, HYDRAULICS, FLYWHEELS, MULTI-DISC CIRCLE TRACK
The above referenced units are strictly factory warranty only.
Units are not to be returned for warranty consideration to Speedway Motors.
EACH OF THESE UNITS ARE TAGGED WITH A FACTORY WARRANTY TAG/LABEL TO CONTACT RAM DIRECTLY FOR WARRANTY REPLACEMENT CONSIDERATION.
Warranty return must be processed with Ram directly and not Speedway Motors.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Ram Clutches 57 T56 Trans Collar Clutch Release Bearing Adapter
Hays 82-104 Hydraulic Release Bearing Kit with T-56 or TR6060
McLeod 1400-30 Hydraulic Throwout Bearing, T-56 Trans, 10 Spline
Hays 82-106 Hyd. Release Bearing Kit T-56, TR6060 to LS2 LS3 LS7
Holley 319-100 Concentric Clutch Slave Cylinder Throwout Bearing
Holley 319-201 T56 Release Bearing Shim, .059 Inch Thick
Holley 319-202 T56 Release Bearing Shim, .119 Inch Thick
Holley 319-204 T56 Release Bearing Convenience Master Kit
McLeod 14-302 Hydraulic Throwout Bearing, T-56 Trans, 26 Spline
Hays 82-105 Hydraulic Release Bearing Kit, T-56 to LS1 or LS6
Q & A
Finally, Project Chevelle gets a real hot rod engine under its hood! And what about that flimsy old column shift three-speed? We've got that covered too.
Pat talks about our LS flexplate options.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
There are a few things to consider before you select a replacement flexplate for your small-block Chevy engine. Speedway has some useful tips to follow that will help speed up the process.