
Ram Clutches 401CT 10.5 Inch GM Pressure Plate, Nodular Ring, 14.1 Lb
Muncie 4-Speed, Saginaw 3-Speed, Saginaw 4-Speed, T10, T5, TKO, 10.500" Diameter



- 10.5" diameter assembly utilizes a nodular iron pressure ring which provides a durable mating surface for the clutch disc
- A 2800 lb. pressure spring provides increased static pressure over stock clutches
- Lightweight design means that it only weighs 14.1 lbs.
- Best if used with the RAM 300 Series organic racing disc
Details
Info
Ram clutches for stock clutch rule classes give you unmatched performance and durability. These 10.5 inch diameter assemblies utilize a nodular iron pressure ring which provides a durable mating surface for the clutch disc. A 2800 lb. pressure spring provides increased static pressure over stock clutches.
If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set.
All Ram street stock clutches are completely rebuildable by the factory.
Tech Tip: When installing a new clutch, be sure to follow the manufacturers instructions for correct set-up. You should also replace the pilot bushing/bearing.
Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.
Item Details
14.1 lbs.Important Messages
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
-
Ram Clutches 401 10-1/2 Inch GM Pressure Plate, Nodular Ring 17.5 Lbs
-
Ram Clutches 1675L 10.5 Inch GM Pressure Plate, Nodular Ring
-
Ram Clutches 851 10.5 In. GM Pressure Plate-Billet Steel Ring, 11.8 Lbs
-
Ace Mfg. 10-1/2 Inch GM Pressure Plate, 15 lbs.
-
Ram Clutches 834 10-1/2 Inch Ford Pressure Plate, Aluminum Ring, 13 Lb
-
Ram Clutches 41122 2.3 Ford 7-7/8 Inch Racing Clutch Pressure Plate
-
Speedway 10-1/2 Inch Pressure Plate, 16.9 lbs
-
Speedway 10-1/2 Inch Pressure Plate, 13.4 lbs
-
Ram Clutches 28513 Ram Coupler Top Plate
-
2.3 Ford 7-7/8 Inch Racing Pressure Plate
Reviews
Q & A
-
Finally, Project Chevelle gets a real hot rod engine under its hood! And what about that flimsy old column shift three-speed? We've got that covered too.
-
-
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
-
This new steel bellhousing from Speedway Motors is made for everyone who wants to run three pedals without spending a fortune or relying on a crusty original.