Product Summary

10 Input Shaft Spline Count, Organic Friction Material

    See more details

    Key Specs

    MFG. Part #255
    Input Shaft Spline Count10
    Friction MaterialOrganic
    Input Shaft Diameter1.063"
    Diameter10.5"
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    Ram Clutches 255 Details

    10-1/2", single clutch disc. Organic disc for single disc pressure plate, weighs 2.5 lbs. Full face design with solid hub.

    Tech Tip: When installing a new clutch, be sure to follow the manufacturers instructions for correct set-up. You should also replace the pilot bushing/bearing.

    Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.

    Item Details

    1-1/16"-10 Spline
    2.5 lbs.

    Clutches, Flywheels and release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection.

    For a full list of warranty information please see our warranty information here

    Warranty Information

    Click for details

    Speedway Motors cannot facilitate the return of defective Ram Automotive Co. products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Ram Automotive Co. at +1 (714)-630-2764.

    Ram Clutches 255 Specifications

    KEY SPECS
    MFG. Part #255
    BrandRam Clutches
    Input Shaft Spline Count10
    Friction MaterialOrganic
    Input Shaft Diameter1.063"
    Diameter10.5"
    Disc StyleFull face
    Hub StyleSprung
    GENERAL
    GTIN Code809009347754
    Sold in QuantityEach

    Questions & Answers

    2 Questions • 2 Answers

    what is the difference of this one and the other one you sell that has 5 fingers?

    by derby

    • 11 years ago

    1 answer

    Will this clutch disc work with a 1512-10 Ram lightweight flywheel?

    by OU812

    • 12 years ago

    1 answer

    2 of 2 questions shown

    Customer Impersonation Script