|
#605351
$107.00
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Many Manual Transmissions, 10 Input Shaft Spline Count
| MFG. Part # | 251 |
| Input Shaft Spline Count | 10 |
| Input Shaft Diameter | 1.125" |
| Diameter | 10.5" |
| Disc Style | Full face |
Need help?
855.313.9176Quick and Easy Returns
Return Policy10-1/2", single clutch disc. Organic disc for single disc pressure plate, weighs 2.5 lbs. Full face design with solid hub.
Tech Tip: When installing a new clutch, be sure to follow the manufacturers instructions for correct set-up. You should also replace the pilot bushing/bearing.
Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.
Clutches, Flywheels and release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection.
For a full list of warranty information please see our warranty information here
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 251 |
| Brand | Ram Clutches |
| Input Shaft Spline Count | 10 |
| Input Shaft Diameter | 1.125" |
| Diameter | 10.5" |
| Disc Style | Full face |
| Hub Style | Unsprung |
| GENERAL | |
| GTIN Code | 809009347709 |
| Sold in Quantity | Each |
4.8
9 Reviews
The customers highly praise the robust nature of the product, emphasizing the clutch's premium quality and affordability. Users appreciate its practicality in racing scenarios, mentioning its reliability in high-performance situations. They also commend its lightweight feature, ensuring proper functionality and performance. With its impressive grip aligned with stock clutch size rules, the product is confirmed to be a good asset for racing and is compared favorably against other speed parts in the market. The clutch's durability is yet to be fully confirmed, but initial feedback is promising.
4.8
9 reviews
5
7
4
2
3
0
2
0
1
0
Filter by Ratings
Good fit good value
5.0
a year ago
Brad
Ab, CA
Verified
fitts well in stock application, SBC to Saginaw with 153t flywheel
Would Recommend
I will buy this product again
5.0
2 years ago
Ramblin Man
Alabama
Verified
I use it in my Factory Stock. Very dependable.
Would Recommend
One Tough Clutch !!!
5.0
5 years ago
Way Fast
Kaukauna, WI. 54130
Verified
Great Clutch, Great Price !!!
Just what I needed. Great service fast and correct
5.0
5 years ago
Campbell racing
Olivehurst ca
Verified
I run imca dirt b modifieds ands this that the clutch I run in it. Great product
Would Recommend
best around hands down
5.0
5 years ago
Hank
Siloam Springs Ar.
Verified
Best place for speedparts
Would Recommend
Awesome Clutch Disc
5.0
8 years ago
Hot Rod Willy
WV
Verified
Performs great in my 430 hp Street Stock race car with a 3 speed saginaw in combination with speedways ACE pressure plate and Hydraulic Throw out bearing.
Would Recommend
Looks good, light weight
4.0
8 years ago
Rwfsam
Tx
Verified
Looks like a nice piece. Time will tell how it holds up.
Would Recommend
good product
5.0
8 years ago
c3
nc
Verified
stock dia light weight good for my racing
Would Recommend
Great grip for stock clutch size rules
4.0
9 years ago
8-ball racer
Baraboo Wi
Verified
Great clutch disc for stock clutch size rules
Would Recommend
Showing 9 of 9 reviews
2 Questions • 4 Answers
Will this work with a stock pressure plate from a stock clutch ?
by Billy
• 8 years ago
1 answer
View Answer
there are no markings on disk as to flywheel side. witch may is it to be installed?
by gogame
• 11 years ago
3 answers
View Answers
2 of 2 questions shown
