Racing Jack Stands and Storage bin

Jack Stand Storage Bin

Secure Your Fixed Height Racing Jack Stands with Our Aluminum Storage Bin

A solid set of jack stands is a racer’s best friend in the pits. From tire changes to emergency repairs track side, getting your race car up in the air safely for you to work under it is imperative. Many racers rely on our steel or aluminum fixed height racing jack stands to get the job done because their super strong design with no moving parts means they are safer and easier to use and gets your race car up in the air that much quicker. The one issue post-race is finding the best jack stand placement to store them in your race trailer. We now have an in-house engineered solution that keeps your best jack stands safe and secure during transport.

Manufactured from .090-inch (1/16-inch) aluminum sheet that is laser cut, press bent to shape, and TIG welded for strength, the fixed jack stand storage bin features the correct width and depth to store two of our fixed height steel or aluminum racing jack stands. Simply secure our jack stand storage bin to the base of your trailer wall using your preferred fastener (rivets, tapping screws, etc.) via the three 1/8-inch mounting holes. Fasteners are not included. Our jack stand storage bin keeps your best jack stands from banging into other tools or your race car during transport, and the wall height is sufficient for retaining the jack stands without further need for tie downs or bungee cords. The 31-inch overall length works perfectly mounted before or after your trailer’s wheel houses and with just a 10-inch width you can easily mount one storage bin on each side of your trailer floor for best jack stand placement when stored without compromising the trailer floor’s surface area for strapping down your race car.

• Laser cut, press bent, and TIG welded from .090-inch thick aluminum sheet stock
• Designed to mount to trailer wall at floor to secure our fixed height racing jack stands
• Holds two of our steel or aluminum fixed height racing jack stands
• Secures via thee 3/16-inch mounting holes (fasteners not provided)
• Design matches other Speedway Motors trailer accessories
• Made in the USA right here at Speedway Motors

 

Racing Jack Stands 

Forget those teetering, cheap jacks stands. If you're not on cement, this is the only jack stand you should own.

• These give you over 142 square inches of support, and won't sink into the ground like others.
• Each stand features a base that's 15" x 9-1/2", and raises your vehicle 12" high.
• The base is .105" thick, the sides are also .105" and the top support is 2".
• Large contact area and durable black finish
• Sold as a pair