This is Garage Sale priced due to cosmetic imperfections. The item functions as originally intended but is discounted due to the blemishes. The photos above will show the imperfections.
NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort.
Kits contain the bearing, shims, fittings for AN# 3 connection, bleed line, and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches.
This bearing comes with a new special machined front bearing retainer for the release bearing to ride on.
- The sleeve ID 1.379
- The bearing OD 2.940
- Length collapsed 2.192
- Length extended 3.050
- Stroke .853
Learn more about hydraulic release bearings and how to properly install them by reading our tech article.How to Install a Hydraulic Throwout Bearing.
Includes a similar front bearing support, but its' register is much larger in diameter and accepts a more conventional, roller-type, front bearing. The front bearing support is in addition to the hydraulic throwout bearing, bleeder hose, and other components within each kit.
CAUTION: Please follow all installation instructions regarding installation and setup. Incorrect setup height will cause undue stress on the o-rings from being over travelled and may lead to a leak in the system. ONLY use Teflon tape to install the fittings or fluid leakage will occur. Please see videos for complete setup information.
Includes a similar front bearing support, but its' register is much larger in diameter and accepts a more conventional, roller-type, front bearing. The front bearing support is in addition to the hydraulic throwout bearing, bleeder hose, and other components within each kit.
CAUTION: Please follow all installation instructions regarding installation and setup. Incorrect setup height will cause undue stress on the o-rings from being over travelled and may lead to a leak in the system. ONLY use Teflon tape to install the fittings or fluid leakage will occur. Please see videos for complete setup information.
Clutches, Flywheels and release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection.
For a full list of warranty information please see our warranty information here
