Quarter Master 7 1/4 In Replacement Clutch 3-Disc Pack 1-1/8 10 Spline
7.25" Diameter, 1.125" Input Shaft Diameter, 10 Input Shaft Spline Count
- 3 disk clutch set is designed to accept a 1-1/8" x 10 spline
- O.D. has a measurement of 7-1/4"
- Each disc has a thickness measuring .105"
- Designed to fit Quarter Master 7 1/4" Pro Series clutch as well as other similarly sized clutches
Build Your KitYou're almost there! This kit has an option or two for you to select. Let us know which options you want for your new kit.
Three disc 1-1/8" x 10 spline replacement clutch pack.
Tech Tip: When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up. You should also replace the pilot bushing/bearing.
Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
What's In The Kit
Disc, Clutch InnerPart # 91025281Qty x 1
Disc, Clutch OuterPart # 91025280Qty x 2
Q & A
Finally, Project Chevelle gets a real hot rod engine under its hood! And what about that flimsy old column shift three-speed? We've got that covered too.
Pat talks about our LS flexplate options.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
This new steel bellhousing from Speedway Motors is made for everyone who wants to run three pedals without spending a fortune or relying on a crusty original.
There are a few things to consider before you select a replacement flexplate for your small-block Chevy engine. Speedway has some useful tips to follow that will help speed up the process.
One of the most challenging things about swapping transmissions can be figuring out the clutch linkage. Speedway can show you how to install the upgraded hydraulic throwout bearing with ease.
We finally get to drive Project Chevelle after the big engine swap, and it's pretty awesome. Rowing through the gears with our new Tremec 5-speed isn't bad either!