-9%
-9%
|
#721BAX102
$214.95
/kit
In Stock
$238.14
Save $23.19
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
79-82 Ford Mustang, 84-93 Ford Mustang
Need help?
855.313.9176Quick and Easy Returns
Return PolicyChanging suspension components sometimes leads to bump steer or unwanted toe change during suspension travel. Correct this problem with QA1's easy to install Bump Steer Kit. This kit features QA1's premium chromoly steel, heat treated, self-sealing and self-lubricating X series rod ends and an aluminum anodized adjusting sleeve that has 2 inches of adjustment.
Kits Include:
*These kits fit vehicles with factory steering ONLY unless otherwise noted.
Application
1979-93 Mustang 5.0 (incl. Cobra)
Charts
Specs
Sleeve overall length 4.79”
Rack thread 9/16”18 - RH
Rack thread depth 2”
Rod end thread 5/8”-18 LH
Rod end thread depth 1.4”
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | BAX102 |
| Brand | QA1 |
| GENERAL | |
| Outside Diameter | 1.19" |
| Overall Length | 4.79" |
| Sold in Quantity | Kit |
| Notes | Sleeve is threaded with 9/16"-18 RH Female (rack side) & 5/8"-18 LH (rod end side) |
| GTIN Code | 806990038968 |
4.8
12 Reviews
Customers praise our product for its high quality build, practicality, and easy installation. The product effectively addresses the bump steer problem and is adaptable to custom fabricated IFS. Users value its fully threaded design, ample spacers, and first-class materials. It is often referred to as a “problem solver” due to its comprehensive kit guaranteeing a complete solution. Even if some alterations were needed, all agreed the product notably improved steering. Many would gladly repurchase, highlighting our product's superiority and satisfactory performance.
4.8
12 reviews
5
11
4
0
3
1
2
0
1
0
Most Liked Positive Review
5.0
Great quality, solved my bumpsteer problem!
These are great quality, really professionally made parts. I adapted them for use on a custom fabricated IFS, and they worked great. I had to shorten the adjusting sleeve slightly to achieve proper alignment, but the materials are first class, and the kit contains a good selection of spacers for height adjustment. The cost may seem a little high, but if you consider the fact that everything you need comes in one box, ready to go, these are a real problem solver!
Most Liked Negative Review
3.0
Yes
Had to trim off each end to get them to work.
Filter by Ratings
Fit the Speedway T-Bird Mustang II rack
5.0
13 days ago
DtewTaBaker
WA
Verified
This solved two problems I was having. 1.) the angle of my tie rod end was quite a bit off from my LCA. 2.) I needed an extension to move my tie rod out. This is several inches longer the the Mustang II tie rod end which works perfectly. I will say the threads are a tight tolerance and removed the coating from the threads.
Would Recommend
YES
5.0
a year ago
TC 500 CADILLAC
NFM FL
Verified
Right and left threaded adjuster, SWEET!
Would Recommend
Great product
5.0
3 years ago
Q
Webster City, iowa
Verified
Solve my bump steer
Would Recommend
Just what I needed
5.0
4 years ago
Jimmy
Townley
Verified
Had to alter them some but helped steering a bunch
Would Recommend
Yes
3.0
5 years ago
A Clark
Jasper,Al.
Verified
Had to trim off each end to get them to work.
One of the nicer kits I've used
5.0
5 years ago
Jacob
Houston, Tx
Verified
Great product, fully threaded, and plenty of spacers for any size you might need.
Would buy again
5.0
6 years ago
Jims
Benton ky.
Verified
Worked good.
Would Recommend
Yes I would buy it again!
5.0
6 years ago
Don
Fredericktown MO
Verified
It was easy to install. Great product.
Would Recommend
Great Quality built
5.0
6 years ago
Chris
Highland,Ca
Verified
Happy with this product! It was very well built.
Would Recommend
I would buy this product again.
5.0
7 years ago
JD55
Antioch ,Ca 94509
Verified
Used this on my Son's 72 Nova with TBird power rack new steering arms and cuplers.
Would Recommend
Showing 10 of 12 reviews
3 Questions • 3 Answers
Does these fit the taper on the factory mustang 2 spindle
by Christopher
• 7 years ago
1 answer
View Answer
Does this require drilling the steering arm out to 5/8?
by Jim
• 8 years ago
1 answer
View Answer
Does this fit both power and manual steering racks.
by Greg
• 8 years ago
1 answer
View Answer
3 of 3 questions shown
1979-1993 Ford Mustang
