Menu

Shop

Garage

Cart

Account

Part # 72126A973

QA1 26A97-3 26 Series IMCA-Legal Steel Monotube Shock, 7/3 Comp/Reb

by

|

$169.95

each

Factory Shipped

This part will be shipped by the manufacturer. We estimate this item will ship on or before December 27th.


Quantity

Select a vehicle to verify Fitment

Product Summary

Dirt Late Model, Modified, Pavement Late Model

    Key Specs

    MFG. Part #26A973
    Shock TypeMono Tube
    Shock Body MaterialSteel
    Shock Body TypeSmooth
    Shock Body SizeLarge Body

    Need To Know

    This Product Will Ship Free

    Need help? Call 800.979.0122

    Quick and Easy Returns

    Details

    The 26 Series shock is a one piece monotube shock that is well suited for a variety of track conditions or as a traction shock in various applications. Constructed with a zinc plated body for corrosion resistance, this shock is a popular choice for modifieds, late models, super stocks and various other classes. Works best on rough tracks and as an easy-up shock on many dirt cars, and on bumpy asphalt tracks in all banking types.

    • 2" O.D. zinc plated steel monotube body
    • Available with Hyperscrew, Sealed Hyperscrew (IMCA Legal) or Schrader Valve
    • Deflective disc valving
    • Linear, digressive and linear/digressive valving available
    • Uses a premium proprietary blend of specially engineered oil to prevent fade
    • 46mm piston allows for maximum car control at all shaft velocities
    • 15mm centerless ground, hard chrome plated piston rod eliminates piston rod flex, increasing valving consistency
    • Damping curve allows for complete control of suspension at low shaft speeds without creating extreme forces at high shaft velocities
    • Can be run in any orientation with no change in rate
    • Replaceable 1/2" I.D. bearings
    • Racer rebuildable and revalveable for unparalleled repeatability
    • Custom valving available
    • 100% dyno tested
    • Made in the USA

    Hyperscrew vs. Sealed Hyperscrew (IMCA legal) vs. Schrader Valve

    Hyperscrew (26 Series) The hyperscrew equipped shocks have a threaded round port near the bearing end of the shock body. This hole is then sealed with a small screw that has an O-ring built into it, sealing the nitrogen gas pressure inside the shock.

    Sealed Hyperscrew (26A Series)

    The gas pressure of these shocks is only adjustable by QA1 and QA1 Authorized Rebuilders per sanctioning body, like IMCA, and track rules.

    Schrader Valve (26V Series)

    With a Schrader valve you can easily adjust your gas pressure. Much like adding air to your car tires, the Schrader valve allows you to make "on the fly" gas pressure adjustments between heat races and features to adjust for varying track conditions.

    Specifications

    KEY SPECS
    MFG. Part #26A973
    BrandQA1
    Shock TypeMono Tube
    Shock Body MaterialSteel
    Shock Body TypeSmooth
    Shock Body SizeLarge Body
    GENERAL
    Upper Shock MountSpherical Rod End
    Lower Shock MountSpherical Rod End
    Extended Length Range24.00" to 24.99"
    Extended Length24.7"
    Compressed Length Range15.00" to 15.99"
    Compressed Length15.7"
    Schrader ValveNo
    FinishZinc Plated
    Sold in QuantityEach
    NotesIMCA legal
    Gas ChargedYes
    Boot IncludedNo