|
#91017055
Push-In Valve Cover Breather Without Shield
- Formed rubber nipple that pushes into 1.22" valve cover hole
$13.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Push-in Attachment Style, 1.25" Valve Cover Hole Size
- Formed rubber nipple that pushes into 1.22" valve cover hole
Key Specs
| MFG. Part # | 91017055 |
| Brand | Speedway Motors |
| Attachment Style | Push-in |
| Valve Cover Hole Size | 1.25" |
| Finish | Chrome |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91017055 Details
Speedway Motors 91017055 Details
These washable, push-in pleated gauze valve cover breathers are available without a shield. The formed rubber nipple pushes into a 1.22" valve cover hole.
- Silver finish
- Without shield
- Washable
- Push-in
- 1.22" valve cover hole
- Sold each
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Speedway Motors 91017055 Specifications
Speedway Motors 91017055 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91017055 |
| Brand | Speedway Motors |
| Attachment Style | Push-in |
| Valve Cover Hole Size | 1.25" |
| Finish | Chrome |
| GENERAL | |
| Sold in Quantity | Each |
| Top Finish | Chrome |
| Shielded | No |
Ratings & Reviews
4.7
11 Reviews
Customers highly commend the product for its quality and practicality. Confirmed qualities include a great fit on valve covers, as stated in multiple reviews. Reviews praise its simple, as advertised features and easy installation process. Material quality stands out, with customers noting its nice chrome finish. One customer even mentioned that its quality matches, if not surpasses, more expensive brands. They also complimented the product's aesthetic, improving the look of their engines. However, some found the rubber base to be a bit stiff. Most customers would recommend it for its value, superior to comparable products.
Ratings & Reviews
4.7
11 Reviews
Customers highly commend the product for its quality and practicality. Confirmed qualities include a great fit on valve covers, as stated in multiple reviews. Reviews praise its simple, as advertised features and easy installation process. Material quality stands out, with customers noting its nice chrome finish. One customer even mentioned that its quality matches, if not surpasses, more expensive brands. They also complimented the product's aesthetic, improving the look of their engines. However, some found the rubber base to be a bit stiff. Most customers would recommend it for its value, superior to comparable products.
4.7
11 reviews
5
10
4
0
3
0
2
1
1
0
Most Liked Positive Review
5.0
Quality product,Good value
Good looking breather.Nice chrome finish.Fits like it's supposed .Quality( as good or better than higher priced brand names ) Only thing i might change?Having The Speedway Motors stamped in the top. Very happy with all Speedway products i've bought over the last 20 + years.
Most Liked Negative Review
2.0
Breathers didn't fit into valve covers
Previously, I have used these breathers on my Billet Specialities tall valve covers for a 1990 Chevy small block, but I wanted to replace mine. I ordered four of them. They would not fit into the holes in the covers. I complained, and I was sent four replacement breathers, but they also didn't fit into the holes. The rubber base seems too stiff (too old?) to squeeze into the holes. Perhaps I can use them on another engine.
Filter by Ratings
I would buy this item again
5.0
a year ago
1970 Corvette
Logan, UT
Verified
These breathers were a great match for my valve covers and air filter
Would Recommend
Buy it
5.0
5 years ago
Roger
Lincoln ne
Verified
Fit valve covers right
Would Recommend
fits great
5.0
9 years ago
tom
michigan
Verified
Great fit
Fits great
5.0
9 years ago
tom
dearborn mi
Verified
fits great
Would Recommend
Perfect
5.0
10 years ago
Studebaker Larry
Denver, CO
Verified
This is one of those simple products that succeeds because it is exactly as advertised.
Would Recommend
way easy
5.0
10 years ago
bahumbug
des moines, ia
Verified
just wipe a lil w/d on the grommet and slid right in the valve cover. look real nice.
Would Recommend
Breathers didn't fit into valve covers
2.0
10 years ago
Eric's Garage
Madison, SD
Verified
Previously, I have used these breathers on my Billet Specialities tall valve covers for a 1990 Chevy small block, but I wanted to replace mine. I ordered four of them. They would not fit into the holes in the covers. I complained, and I was sent four replacement breathers, but they also didn't fit into the holes. The rubber base seems too stiff (too old?) to squeeze into the holes. Perhaps I can use them on another engine.
Would Not Recommend
Looks Awesome!
5.0
11 years ago
Prof
Irvine,Ky.
Verified
This is a really nice looking and working breather. You cant go wrong with the price and service from Speedway.
Would Recommend
great price great product
5.0
12 years ago
awdblazer
Winnipeg, MB, Canada
a lot cheaper than a k&n and looks great would have been nice if they had a black top not chrome
Would Recommend
Quality product,Good value
5.0
12 years ago
sparkyd
OHIO
Good looking breather.Nice chrome finish.Fits like it's supposed .Quality( as good or better than higher priced brand names ) Only thing i might change?Having The Speedway Motors stamped in the top. Very happy with all Speedway products i've bought over the last 20 + years.
Would Recommend
Showing 10 of 11 reviews
Questions & Answers
1 Question • 2 Answers
Questions & Answers
1 Question • 2 Answers
are these breathers wide open inside it? I have a couple of other push in breathers one from Edelbrock and both of them are not open on the inside only have a small cresent moon shape cut out in the bottom not a circle. "I have a gm crate motor 383 that needs some better ventilation i'm running one breather one one valve cover and pcv valve in the other. its a street driven classic truck.
by dumbshit
• 12 years ago
2 answers
View Answers
1 of 1 questions shown