Pro Race 24264 Pro/Street 8 Inch Chevy 454 Harmonic Balancer
454 Chevy Big Block V8, 8" Outside Diameter, Not SFI-approved SFI Rating, 11.4 lbs. Weight
- The lightweight dampers weigh only 11.4 pounds
- Specially designed for the Pro/Street 454 Big Block Chevy
- They have been machined to tolerances far exceeding those used by OEM’s
- Permanent rolled-in timing marks are very visible and will never fade or become less visible
- Has an 8.00" outside diameter and a removable counter-weight for use with internal or external balance applications
These Pro/Street 454 Big Block Chevy harmonic dampers by Pro Race Performance Products have been machined to tolerances far exceeding those used by OEM’s. Dampers weigh 11.40 pounds. These Dampers feature an amazing overall surface finish. Permanent rolled-in timing marks are very visible and will never fade or become less visible! Sold Each.
- Pro/Street 24264 Harmonic Damper
- 8.00" outside diameter
- 11.40 pounds
- Removable counter-weight for use with internal or external balance applications
- For 454 Big Block Chevy
• “Nodular Iron Construction – Most cast dampers are manufactured from gray iron castings. Nodular iron is over 30% stronger than gray iron.
• Bonded Elastomer – Outer ring and inner hub are bonded (vulcanized) to the elastomer. This minimizes the potential for the outer ring to move on the hub, losing true TDC position.
• Precision Balanced – Dampers are machined and precision balanced. • 60o of permanent easy to read timing marks (40o on SB Ford models)
About Nodular Iron
Nodular Iron, also referred to as ductile iron, is typically the material used for heavy duty or racing applications of cast iron products. It is approximately 30% stronger than gray iron. So it was only natural that when PRO/RACE developed the heavy duty OE replacement PRO/STREET dampers, high strength nodular iron was the material of choice.
While PRO/STREET dampers are not intended for racing, the fact that they are cast of nodular iron, as opposed to ordinary gray iron, means that they are suitable for higher
rpms than most competitive models. (Note: The PRO/STREET Nodular Iron Harmonic Dampers are NOT SFI certified). However to prove the integrity of the PRO/STREET dampers, we had the SFI test lab run some spin tests. The PRO/STREET damper was subjected to 8,000rpm for one hour, and then 12,500 rpm for 15 minutes with no sign of degradation! (note: this by no means suggests the PRO/STREET damper should be used in extreme applications – use PRO/RACE or PRO/SPORT for high performance applications).
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Q & A
There are a few things to consider before you select a replacement flexplate for your small-block Chevy engine. Speedway has some useful tips to follow that will help speed up the process.
Check out this helpful piston ring style chart.
Learn how to identfy motors for your LS Swap. In this guide we cover generation 4 small block engines and some of the cheaper options for more power.
Trying to decide which power plant to use in your latest project? Here's a quick guide of modern V8 engines for hot rodders to consider.
In this Tech Tip, John discusses LT1 rotating assembly options for a customer looking to build a solid autoX, drag, and occasional strip powerplant for his Firebird.
Professional insight on some useful crate engine tools that will improve your engine building experience.
Follow this step by step guide on how to install adjustable LS motor mounts to set your engine location exactly where you want it.
Follow along as Jeff installs Mr. Gasket aluminum finned valve covers and gaskets to his iron-head engine. Learn how to prep the covers for a fresh coat of engine paint!