Power Steering Adapter and Flow Valve Kit

We know how frustrating parts of building your hot rod dreams can be. Getting the right fittings and accessories for your power steering setup can be confusing - we took care of the troubles for you with our Power Steering Adapter and Flow Valve Kit.

Kit Contains:

• (1) Speedway Motors Power Steering Adapter O-Ring to Inverted Flare
• (1) Speedway Motors Mustang II Power Steering Flow Valve

Speedway Motors Power Steering Adapter O-Ring to Inverted Flare

If you have a power steering pump using late model style O-ring sealed hoses that you need to adapt to traditional inverted flare hoses, this inverted flare adapter is a simple fix. Simply insert the adapter into the flow control fitting and then install your inverted flare hose. Use to convert from 16mm o-ring to 5/8" inverted flare style.

• Angle: Straight
• Diameter Big End: .500"
• Diameter Small End: .380"
• Inside Diameter: .240"
• Overall Height: .404"

Speedway Motors Mustang II Power Steering Flow Valve

It is common to use an early GM power steering pump with a Mustang II power rack and pinion. Most who have tried it have found that the steering was twitchy or that it easily darts. This valve reduces the fluid flow from three gallons-per-minute to two gallons-per-minute, which cures the problem. For applications using the O-ring style power steering hoses. Installs in the back side of the pump as shown in the extra photos.

• 5/8 Female Thread
• 3/4-16 Male Thread
• O-ring 200-113

910-32918 Instructions (PDF)