|
#91631-999
Plain Steel Sleeve for 5/8 Inch Rod Ends, Custom Length
- Supplied in a plain steel finish
- Threaded for 5/8"-18 RH and LH heims
- Each sleeve has RH thread in one end, and LH thread in the other to allow for easy adjustment
$92.99
/each
Made to Order
This is a custom fabricated part. We estimate this item will ship on or before October 7th.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Steel, Natural
- Supplied in a plain steel finish
- Threaded for 5/8"-18 RH and LH heims
- Each sleeve has RH thread in one end, and LH thread in the other to allow for easy adjustment
- Custom length; please specify your desired assembled eye-to-eye length in the note field when placing your order
- Actual length of sleeve will be 3" less than desired eye-to-eye length to allow for rod ends
Need To Know
Made to Order
This custom item will ship when completed
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91631-999 Details
Speedway Motors 91631-999 Details
If you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.
To order:
- Use guide below to measure your finished length.
- The part number and length you order will be 3" longer than the sleeve you receive. (I.E., if you order a 48" part number, you will receive a 45" long sleeve.) This is the difference in length required to give you the correct finished center-to-center measurement.
- All sleeves will have internal RH thread in one end and LH thread in the other.
Item Details
NOTE: Specify eye-to-eye length in Comments section of your Shopping Cart.
Charts
Guides & Documents
Speedway Motors 91631-999 Specifications
Speedway Motors 91631-999 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91631-999 |
| Brand | Speedway Motors |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Hardware Included | No |
| Sold in Quantity | Each |
Ratings & Reviews
5
10 Reviews
Customers highly appreciate our product's quality, fit, and practicality. It stands out as an excellent choice for steering drag link replacement, perfectly fitting the required areas. Users expressed satisfaction with the premium finish, enhancing its aesthetics and reducing the need for any additional work, such as painting. Its utility is further confirmed by customers' willingness to repurchase if needed. These features not only demonstrate the superior usability and material quality, but they also make our product a preferred option over competitors.
Ratings & Reviews
5
10 Reviews
Customers highly appreciate our product's quality, fit, and practicality. It stands out as an excellent choice for steering drag link replacement, perfectly fitting the required areas. Users expressed satisfaction with the premium finish, enhancing its aesthetics and reducing the need for any additional work, such as painting. Its utility is further confirmed by customers' willingness to repurchase if needed. These features not only demonstrate the superior usability and material quality, but they also make our product a preferred option over competitors.
5
10 reviews
5
10
4
0
3
0
2
0
1
0
Filter by Ratings
Yes I would order this again if I needed to
5.0
4 months ago
CB
Mayer Az
Verified
The dimensions I gave you were exact and you cut them perfectly. The drag link works perfectly. I was able to use the stock steering box which means the fender headers fit perfectly. Go gasser go!
Would Recommend
Follow measuring directions prior to ordering
5.0
a year ago
bluespwr
Santa Maria, CA
Verified
If you measure correctly, all will be well. I sprayed mine gloss black. Installed on '47 Ford Tudor with front disc-brake conversion which forced me to use flat steering arms and these rods with heim joints. Threaded well and straight rod.
Would Recommend
I would buy again
5.0
a year ago
Hot rod
Petal Mississippi
Verified
It fits perfectly
Would Recommend
Custom length drag link
5.0
a year ago
Mr Ed
Auburn NH
Verified
Well made. Threads were clean and installed easily
Would Recommend
I would buy again
5.0
a year ago
Bob
SLC Utah
Verified
Perfect for my application
Would Recommend
I would buy this again if needed.
5.0
4 years ago
Clif
Dawsonville, Ga.
Verified
should work great
Would Recommend
buy another if i need
5.0
6 years ago
bodyman
falls city ne
Verified
fit like a glove!!!!!!!
Would Recommend
I would buy again.
5.0
8 years ago
David
Ardmore
Verified
The support personal helped me determine the length I need. Was shipped the next day & received the next. Awesome service
Would Recommend
draglink review
5.0
16 years ago
The Minister of Sinister
Phx AZ
Verified
worked well as a sterring drag link
Would Recommend
Nicer that expected
5.0
16 years ago
Joe
Cincinnatil, Oho
I used two of these, one as a tie rod and one as a drag link. The quality of the finish really was a pleasant surprise. I bolted these straight on the car with no need to paint.
Would Recommend
Showing 10 of 10 reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.