Pertronix Flame-Thrower SBF Distributor, Coil & Wires, 12 Volt

Flame-Thrower Stock-Look cast distributor with Ignitor, Ford S/B, black cap

• All new cast housings molded after the original Delco distributors
• Tailored advance curve for optimum performance and drivability
• Adjustable vacuum canisters for extra tunability
• High dielectric strength cap and rotor with brass contacts
• Legal in all 50 states (C.A.R.B. E.O. #D-57-23)
• Warranty 30 months electronics / limited 1 year mechanical

6.75" from intake to very top

• PerTronix D134600 Flame-Thrower Electronic Distributor Cast Ford Small Block with Ignitor Technology Vacuum Advance Black Cap

• PerTronix D134600 Flame-Thrower Electronic Distributor Cast Ford Small Block with Ignitor Technology Vacuum Advance Black Cap

Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45,000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike.

45,000 volts.
• Available chrome plated or black for that "stock look".
• For use with inductive or CD ignition systems.
• Low 0.6 Ohm primary resistance.
• Legal in all 50 states and Canada. (C.A.R.B. E.O. #D-57-21)

• PerTronix 45111 Flame-Thrower II Coil 45,000 Volt 0.6 ohm Black Epoxy

• PerTronix 45111 Flame-Thrower II Coil 45,000 Volt 0.6 ohm Black Epoxy

Now you can get a "stock-look" spark plug wire, that performs! We've designed these wires with the same core that we use in our 8mm wire. The only real difference is the 7mm flat black silicone jacket that hides its performance potential from the naked eye. Get the best of both worlds with "state-of-the-art performance and a stock look."

These wires will fit most original wire looms. Select a custom tailored set for a great out of the box fit or a universal kit to match your unique engine and wire loom configuration.

Features

• Two current paths for reliability and redundancy.
  Primary path: Spiral wound stainless steel alloy.
  Secondary path: Carbon impregnated fiberglass center core.
• 7mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
• EPDM (Ethylene Propylene Diene Methylene) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
• Fiberglass reinforcing braid for added strength and flexibility. Lifetime Warranty.

• PerTronix 708104 Flame-Thrower Spark Plug Wires 8 cyl Ford Custom Fit Black

• PerTronix 708104 Flame-Thrower Spark Plug Wires 8 cyl Ford Custom Fit Black