Performance Design LT2 C8 Corvette Carbon pTR Intake Manifold Kit

#90970620

Performance Design LT2 C8 Corvette Carbon pTR Intake Manifold Kit

Engineered for 2020 and Later C8 LT2 Corvette Coupes
Additional 25 Horsepower to the Rear Wheels When Used with 95 mm Throttle Body
Complete ECM Integration with Factory Connectors

Flange Color:

Select a flange color

$2,199.99

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Engineered for 2020 and Later C8 LT2 Corvette Coupes
Additional 25 Horsepower to the Rear Wheels When Used with 95 mm Throttle Body
Complete ECM Integration with Factory Connectors
No Calibration Required (95mm throttle body)
Tested to Over 50 PSI

See more details

Key Specs

MFG. Part #	Select Flange Color
Brand	Performance Design
Injection Style	Direct Injection
Intake Manifold Type	Tunnel Ram
Material Type	Nylon

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Installation Details

Installation Tips

Carbon fiber exposed to UV will exhibit some resin yellowing over time. While our experience has been that in most cases the changes over time has been less than expected, in some cases with more exposure this is accelerated. If your application will be exposed to UV over longer periods, it is recommended that an automotive clearcoat be applied to the carbon fiber. This can be done by any automotive body shop using standard painting methods. In addition, anodized components are more affected by UV exposure.

Our carbon fiber components receive a final polish before putting them in the box. However, over time the luster can be reduced. To easily return your product to peak shine, use Meguiar's PlastX polish and a microfiber to bring back a deep shine.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Details

Performance Design Carbon pTR C8 Corvette Intake Manifold

Producing an additional 25 horsepower at the rear wheels on average when used with the Lingenfelter 95 mm Throttle Body, the Performance Design Carbon pTR Intake Manifold takes stock C8 Corvettes to the next level with style and performance. It features a great-looking 5-layer carbon fiber upper and a durable heat-resistant glass-reinforced nylon lower while embracing lightweight tunnel ram architecture.

Innovative engineering allows for complete ECM integration using the factory connectors, and there is no calibration required when used with the 95mm throttle body. When using the 103mm throttle body calibration is required.

The Performance Design Carbon pTR Intake Manifold is a complete kit designed to work with the factory-installed connections and fittings on all C8 LT2 Corvette coupes.

Engineered for 2020 and Later C8 LT2 Corvette Coupes
Additional 25 Horsepower to the Rear Wheels When Used with 95 mm Throttle Body
Complete ECM Integration with Factory Connectors
No Calibration Required (95mm throttle body)
Tested to Over 50 PSI
Heat Resistant 5 Layer Carbon Fiber Plenum & Foam Core Flange
Polymer Lower Runner Pack Resists Heat Soak
Lightweight Glass Filled Nylon Lower
Tunnel Ram Architecture
Has Provisions for Port Injection
Plenum volume: 13.7L
Fuel Rails Available
SEMA 2021 Global New Product Award WINNER!

Application

Fits 2020-2025 Corvette Stingray. Additional power improvements when used in conjunction with Lingenfelter Corsa Exhaust. Does not fit convertible Corvette models. 95mm throttle body sold separately. Cars vary in base horsepower. The Performance Design Carbon pTR Intake Manifold increases the horsepower by 25 at the rear wheel on average.

Specs

Airbox coupler with optional interlocking adapters to fit LT2, LT5 or Nick Williams 103mm throttle bodies.
MAP and Throttle Body extension harnesses
O2 sensor harness retainer brackets and hardware
CPS. PCV fresh air and PCV foul air hoses featuring premium Parker Push-Lok hose
PCV foul air fitting
Brake booster port plug
CPS hose quick disconnect tool

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Flange Color to see
Brand	Performance Design
Injection Style	Direct Injection
Intake Manifold Type	Tunnel Ram
Material Type	Nylon

GENERAL
Color	Select Flange Color to see
EGR	No
Cylinder Head Configuration	Rectangular Port
Plenum Finish	Natural
Base Material	Plastic
Throttle Body Included	No
Injectors Included	No
Aftermarket Fuel Rail Required	Yes
Fuel Rails Included	No
Hardware Included	Yes
Runners Included	Yes
Runners Removable	Yes
Supplemental Bosses Cast-In	Yes
Supplemental Bosses Machined	No
Supplemental Boss Quantity	8
Sold in Quantity	Kit

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.