Oversize 5/8 Inch Coarse Wheel Stud, Short Knurl, Set of 5

Replace those "pony" stock wheel studs with these "super-strength" oversized wheel studs. Overall length is 3" and 1-3/4" thread length.

• Set of 5
• 0.375" Knurl Length
• 0.685" knurl dia. for recommended standard hole size 0.669" to 0.679"

Recommended drill bit size is 43/64" (0.6719")  # 910-82007

Recommended Press Fit for press-in wheel stud 

• Steel Hub          0.006"-0.016"
• Aluminum Hub   0.010"-0.016"

Tech Tip:  If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.