NOS 14164NOS Nitrous Bottle Heater, 12 Volt DC
- This item ships directly from the manufacturer. It may take an additional 2 business days for NOS to ship this item.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
NOS systems are calibrated for optimum performance with a bottle pressure of 900- 950 psi. The pressure will change with temperature. Heater kits are thermostatically controlled (except P/N 14169NOS, which is pressure controlled) to keep the bottle at correct pressure. Kits available for the most popular-sized bottles, with both 12-volt and 110-volt heaters offered.
- Calibrated For Optimal Performance
- Bottle Pressure Of 900-950 PSI
- Thermostatically Controlled
- Provides Correct Pressure
- Available for Most Popular-Sized Bottles
More Like This
NOS 14160NOS Nitrous Bottle Heater for 2 & 2.5 lb. Bottles 12 Volt DC
NOS 14161NOS Heater Element for 2 & 2.5 Pound Bottles, 12 Volt DC
NOS 14165NOS Nitrous Bottle Blanket, 7 Inch Diameter, 10 lb. Bottle
NOS 15894NOS Nitrous Bottle Heater Thermostat
NOS 14162NOS Heater Element, 12 volt DC
NOS 14164-110NOS Nitrous Bottle Heater, 110 Volt, 10/15 LB Bottle
NOS 14169NOS Automatic Nitrous Bottle Heater For 10/15 Lb Bottles
Edelbrock 72700 Nitrous Oxide Bottle Heater, 12 V DC
Q & A
Now that Project Chevelle is making some real power, we've decided to ditch the old tank, lines, and pump in favor of a new tank and pump from Tanks Inc.
In this episode, Project Chevelle takes a big step in its muscle car transformation. It's out with the little old 307 and to the dyno with our new 383 from BluePrint Engines!
Speedway Motors employee Pat O. is back to talk about a cool little nostalgic piece now available at Speedway Motors, our Fiberglass Tunnel Ram Shark Scoop.
Speedway Motors employee Pat O. is back with Dave's 1951 Chevy Truck project to talk about the 1947-1954 Chevy Truck EFI Fuel tank available from Speedway Motors.
Now that Project Chevelle is making some real power, it's time to give it a little more fuel. Follow along as we install a new tank and pump from Tanks Inc.
After installing the intake manifold and carbs on his 8BA, Heath P. continues on to the fuel and throttle setup. See how he mounts each part while making modifications to complete the install.
Do you have carbs sitting on the shelf waiting to be put on? Heath talks about the preparation and parts needed to install a set of Super 9-7 Carbs on his 1949 Flathead 8BA V8 Model A.