|
#91034316-MAN
$27.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Ends Tie Rod Component, Outer Position, Natural
| MFG. Part # | 91034316-MAN |
| Brand | Speedway Motors |
| Position | Outer |
| Tie Rod Style | Straight |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyOuter tie rod and inner extension fits left or right, attaches steering rack to spindles. Fits both manual Mustang II and 1982-1988 T-Bird power racks.
Replacement boot available as # 910-913101
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034316-MAN |
| Brand | Speedway Motors |
| Position | Outer |
| Tie Rod Style | Straight |
| GENERAL | |
| Tie Rod Component | Ends |
| Thread Type | RH Female |
| Thread Pitch | 9/16"-18 |
| Degree of Taper | 7 degree |
| Stud Length | 1.75" |
| Material Type | Steel |
| Finish | Natural |
| Thread Length | 1.9" |
| Stud Diameter | 0.5" |
| Center Hole to End of Shank | 3.4 |
| Grease Zerk Included | Yes |
| Sold in Quantity | Each |
4.9
51 Reviews
Customers highly appreciate our product for its perfect fit, quality build, and great usability. It's lauded as a 'perfect replacement' for worn-out or damaged parts and praised for its compatibility with a variety of setups, from classic to custom. The product also stands out for its easy installation process, with many customers highlighting that it threads on easily. Comparatively, it offers great value, with customers stating it's as good as, if not better than, competitor brands, while being more reasonably priced. The inclusion of features such as a grease cert, which extends product life, is praised. Top-quality materials used in our product ensure durability, ensuring customer satisfaction and repeat purchases.
4.9
51 reviews
5
46
4
4
3
1
2
0
1
0
Most Liked Positive Review
5.0
I would buy these again, if I'm still around
These look to be very well made. Some tie rod ends come without any way to grease them to help them last longer. Most of the older made cars in the 50s/ 70s had grease certs in most moving parts. If they were cared for properly, for the most part, they outlasted the car they were on. Most cars back then had 21 to 28 certs that needed to be greased at each oil change. You can hardly find a late model car with any certs at all to grease. So the cars of today have what lube is in them when made and when they wear out, they're replaced. This type, with the grease cert is what I would replace them with and speedway has been my choice of parts for me for many years.
Most Liked Negative Review
3.0
I might buy again
Would be nice if you had more choices like good better and best.
Filter by Ratings
I would definitely buy again!
5.0
2 months ago
Deno
Hesperia ca
Verified
Perfect fit and finish !
Would Recommend
I would buy them again
5.0
11 months ago
Dc
Kansas
Verified
Worked perfectly
Would Recommend
Tie Rod Ends worked great.
5.0
a year ago
Frankenstang
Peoria illinois
Verified
It seems as if my build is lasting forever. Its nice to get parts that work well the 1st time. Thank you
Would Recommend
I would use this product again
5.0
a year ago
RAM
Roscoe illinois
Verified
Product fit as should with no adjustment issues.
Would Recommend
Well made
5.0
a year ago
Corey
Nashville
Verified
Well made tie rod.
Would Recommend
Just what I needed
5.0
a year ago
Byron
Vallejo California
Verified
This product needs to have the thread type stamp on it, other than that it's great..
Would Recommend
I would purchase this item again
5.0
a year ago
Dave
Covington, LA
Verified
Product fit perfectly.
Would Recommend
Staff is great.
5.0
2 years ago
Cubby
Plainfield, Indiana
Verified
Rebuilt Mustang II front end. Works fine.
Would Recommend
Great quality abd would buy again
5.0
2 years ago
Pat
WV
Verified
For my kit car project
Would Recommend
I would buy this product again
5.0
2 years ago
Ace
Minnesota
Verified
Used for the mustang II power rack. The part for good.
Would Recommend
Showing 10 of 51 reviews
10 Questions • 12 Answers
Will this fit a mustang II power rack, your wording is confusing
by Joe
• 9 years ago
1 answer
View Answer
The only option listed is for a manual rack Will these fit mustang 2 / tbird power racks?
by Scott
• 9 years ago
1 answer
View Answer
will this product work with the flaming river manual rack and pinion?
by 52 chevy cpe
• 10 years ago
1 answer
View Answer
I have purchased new upper & lower control arms as a package for a Mustang II front end on my street rod from you good folks. What I need is the torque specs, in foot pounds, for the tie rod ends to the spindle. Most all other specs I have found on-line with the products purchased, but nothing for tie rod ends. Fred Minke
by Older Fred
• 10 years ago
1 answer
View Answer
Dose this tie rod end need jam nut? If so what size, why don't you sell them? thanks
by jer
• 11 years ago
1 answer
View Answer
will this fit into an 82 chevy c10 1/2 ton spindle? if not do you have a tierod end that will and also fit the mustang ii manual rack?
by jcotten
• 12 years ago
1 answer
View Answer
Will these work on my 51 Chevy pickup with a Heidts Mustang II crossmember and a T-Bird power rack or do I need the extended length or extensions?
by Zimspad
• 13 years ago
2 answers
View Answers
What is the length of the taper?
by
• 14 years ago
1 answer
View Answer
Building a 37 ford with mustang II front suspension and power steering rack. Will this tie rod end be correct? Thank you,
by Dave
• 15 years ago
2 answers
View Answers
What is the taper angle on the stud?
by Ben
• 15 years ago
1 answer
View Answer
10 of 10 questions shown
1974-1978 Ford Mustang II
1974-1980 Ford Pinto
1975-1980 Mercury Bobcat
