-8%
-8%
|
#5504311
Mr Gasket 4311 Competition Wheel Stud, 1/2 Inch
$65.95
/set
In Stock
$71.95
Save $6.00
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
-8%
-8%
|
#5504311
$65.95
/set
In Stock
$71.95
Save $6.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Need help?
855.313.9176Quick and Easy Returns
Return PolicyExtra long, press-in and screw in studs are now available for competition use. These studs are made of high-quality, grade 8 material and are plated for durability. 1/2 "-20 x 2-7/8" fits Chrysler, Ford and most applications with 1/2 " studs. Set of 10.
Features
Recommended drill bit size is 41/64" (0.6406")
Recommended Press Fit for press-in wheel stud
Tech Tip: If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 4311 |
| Brand | Mr Gasket |
| Thread Pitch | 1/2"-20 |
| GENERAL | |
| Overall Length | 2.875" |
| Knurl Diameter | 0.660" |
| Knurl Length | 0.465" |
| Thread Length | 2.875" |
| Head Diameter | 0.495" |
| Material Type | Steel |
| Sold in Quantity | Set |
| Notes | Set of 10 studs KNURL DRILL 21/32 (.656) |
| GTIN Code | 084041043110 |
4
2 Reviews
Customers have praised the high-quality, fitting perfectly on axle hub, of the wheel studs product. Despite being slightly longer than expected, buyers were able to make it work. They stand out for their suitability and functionality for builds, pointing to their practicality. Some customers note minor damages, a testament to the product's robustness as these could easily be rectified. Compared to alternatives, our wheel studs offer a superior fit and undeniable quality, earning them a prime position in the market.
4
2 reviews
5
1
4
0
3
1
2
0
1
0
Filter by Ratings
Not a product review
3.0
5 months ago
Bill
Portland Oregon
Verified
Not a product review but more about the shipping FedEx will not ever get something to you on time even if you pay $20 extra in shipping and that is non-refundable
Would Recommend
These wheel studs saved my build.
5.0
4 years ago
Cisco 67 Mustang
Elkhorn Wisconsin
Verified
The studs fit the axle hub fine, they were about 1/4" too long but I knew that going in. The packaging could have been better, two of the studs had a damaged thread, nothing a file could not fix.
Would Recommend
Showing 2 of 2 reviews
1 Question • 1 Answer
Are these the proper upgrades for a stock stud that measures 1/2x20, .641 knurl, .313 shoulder. 1970 Mercury Cougar
by Franco
• 8 years ago
1 answer
View Answer
1 of 1 questions shown