Moroso Accumulator, Mounting Brackets and Fitting, 1.5 Quart

Accumulator

This Moroso oil accumulator prevents intermittent loss of oil pressure that can occur under hard acceleration, severe cornering or hard braking. If oil pressure drops below optimum levels, an air-charged piston automatically forces up to 1.5 quarts of reserve oil to the main galleries.

The Accumulator is tapped to the pressure side of the engine’s oiling system. When the engine is running, oil pressure forces reserve oil into the accumulator and compresses the air ahead. When the danger is over and the pump is once again primed with oil, the oil pressure forces oil back into the Accumulator where it is ready for the next emergency. Moroso Accumulators can also be used to manually pre-lube engines before starting to prevent cold-start scuffing and premature bearing wear.

• Three quarts of oil under pressure provide emergency supply instantaneously when needed
• Air Pressure gauge verifies that Accumulator is ready for use
• Cold start valve releases oil into cold engine for reduced wear
• Tapped for 1/2" NPT fitting

 

Brackets

For use with Moroso 1.5 quart oil accumulator

• Brackets provide safe, sure mount for Moroso Accumulators
• Designed to be easily fastened to any flat surface
• Includes T-Bolt type clamps accepted by NHRA

 

Fitting

These straight flare adaptors connect 1/2" pipe to straight -10 AN fittings. They are lightweight aluminum and feature a 37° sealing angle. Black finish will give your engine compartment the look you are after. Order your desired size.

• Precision machined to ensure precise thread engagement
• Lightweight aluminum fitting
• -10 AN to 1/2" aluminum pipe
• 37° sealing angle guarantees a positive seal at maximum operating pressures
• Available in Black anodized finish for a custom look