-13%
-13%
|
#91048357
Mittler Grand National Aluminum Drive Flange, 5-on-5 Inch
- Features a lightweight, yet strong aluminum construction
- Anodized finish provides and extra layer of corrosion protection
- Will accept a 24 spline input shaft
Starting from
$73.60
/each
In Stock
$84.99
Save $11.39
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, 5 on 5" Bolt Pattern, Aluminum, Anodized
- Features a lightweight, yet strong aluminum construction
- Anodized finish provides and extra layer of corrosion protection
- Will accept a 24 spline input shaft
- Spline O.D. measures 1.56"
- Kit includes flange, dust cap, and set screws
Key Specs
| Brand | Mitler Brothers |
| Bolt Pattern | 5 on 5" |
| Material Type | Aluminum |
| Finish | Anodized |
| Spline Count | 24 |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyDetails
Details
The diameter of the GN HAT flange is smaller than the diameter of the DIRECT flange, therefore the HAT flange will work either rotor mount application, but the DIRECT flange will only work with direct mount rotor setups.
"DIR" Refers to a hub assembly that uses a rotor adaptor that bolts the rotor directly to the back of the hub. "HAT" refers to a hub assembly that uses a rotor and hat assembly that slides over the outside of the hub to mount to the rotor.
Be sure to give the two countersunk retainer screws a liberal dab of grease or anti-seize compound.
Item Details
Includes axle cap, O-ring and cap bolts.Specifications
Specifications
| KEY SPECS | |
|---|---|
| Brand | Mitler Brothers |
| Bolt Pattern | 5 on 5" |
| Material Type | Aluminum |
| Finish | Anodized |
| Spline Count | 24 |
| GENERAL | |
| Spline OD | 1.56" |
| Sold in Quantity | Each |
| Notes | Includes flange, dust cap, and (2) flat head screws. 5/16018 x .75" (3) soc head cap screws 1/4-20 x .75". cap 1/4 x 3.062 od, 2-1/4 bolt circle. o-ring .103 x 1.674 )200-131) o-ring .139 x 3.984 (200-242) |
| Outside Diameter | Select Rotor Mount to see |
| Flange Thickness | .44" |
Ratings & Reviews
4.8
5 Reviews
Customers highly recommend the product, especially for its quality and practicality. The drive flange is confirmed to fit both older and newer hubs, although adaptation may be needed for older plates. Made of durable aluminum, it's suitable for Mittler Bros hubs. Users confirm its perfect fit and commend its performance, especially in vintage racing cars. However, it's noted that the smaller O.D. "HAT" style may not fully support wheels but remains efficient. It's viewed as a quality product for its price.
Ratings & Reviews
4.8
5 Reviews
Customers highly recommend the product, especially for its quality and practicality. The drive flange is confirmed to fit both older and newer hubs, although adaptation may be needed for older plates. Made of durable aluminum, it's suitable for Mittler Bros hubs. Users confirm its perfect fit and commend its performance, especially in vintage racing cars. However, it's noted that the smaller O.D. "HAT" style may not fully support wheels but remains efficient. It's viewed as a quality product for its price.
4.8
5 reviews
5
4
4
1
3
0
2
0
1
0
Filter by Ratings
Perfect
5.0
6 months ago
29b
nebraska
Verified
Very nice product, perfect fit. Will only fit Mittler brand hub.
Would Recommend
I would buy again
5.0
3 years ago
Cheater
Garrett indiana
Verified
Worked as it should
Would Recommend
Top quality
4.0
7 years ago
Toolman
Ontario, CANADA
Verified
This drive flange will fit the newer hubs and also the older gold anodized however the retainer bolts do not exactly match the gold plates and will require redrilling. Neither Speedway or MB have an available option for the older plates.
Would Recommend
quality isn't cheap
5.0
7 years ago
Melvin
Minnesota
Verified
these are a nice beefy aluminum drive flange for the Mittler Bros hubs. The only other comment is that the "HAT" style which is slightly smaller O.D. does not make much contact with the wheel outside of the circumference of the wheel studs. It doesn't seem to be an issue but I'm sure there is not as much strength if the wheel isn't fully supported.
Would Recommend
I will buy this product again
5.0
11 years ago
Bona
Winthrop, ME.
Verified
I use this product & others from you on my vintage race car. The quality & fit was perfect. As always,, very satisfied with all products. Oh,, by the way I finished 2nd on Sat. night.
Would Recommend
Showing 5 of 5 reviews
Questions & Answers
Questions & Answers
5 Questions • 5 Answers
Looking to get just the dust cap for this. Somehow I lost mine. It doesnt look like yall sell it separately. What is the bolt hole center to center measurement for the cap? Hoping it is the same as your house brand cap.
by Ryan
• 5 years ago
1 answer
View Answer
What bearing part numbers does the hub use?
by Bryon
• 8 years ago
1 answer
View Answer
Will this fit a Harris grand national style reared. Everything in the picture from the dust cap to the location of the mounting bolt locations look correct but without that spec its hard to know.
by Racer29
• 8 years ago
1 answer
View Answer
Do u sell dust cap by its self.?
by mille81
• 11 years ago
1 answer
View Answer
what size are the bolts that hold the flange to the hub ?
by joek89
• 11 years ago
1 answer
View Answer
5 of 5 questions shown