Made from C1010 material and heat treated. Has 25% more column strength than stock pushrods. Black finish, 5/16" diameter and .080" wall with drilled, welded balls. Can be used with guide plates. Use for spring pressures up to 300 lbs.

Available in stock length (7.794"), .100" longer (7.894") and .150" longer (7.944"). Set of 16.

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Length to see
Brand	Manley
Tube O.D.	0.3125"
Overall Length	Select Length to see

GENERAL
Sold in Quantity	Set

Ratings & Reviews

4.7

36 Reviews

Overall Assessment

Customers consistently praise the product's fit and quality, frequently mentioning its durable material and suitability for various projects. Users found the pushrods easy to install and an excellent choice for achieving proper geometry of the valve train. Many are impressed with the ease and accuracy in fitment, seeing it as key evidence of the product's high-quality design and manufacturing. The pushrods are also appreciated for staying strong under high RPMs and working well with guide plates. Numerous customers express a willingness to repurchase them, highlighting the product's superior performance and trustworthiness in comparison to competitor's alternatives.

Write A Review

4.7

36 reviews

Most Liked Positive Review

5.0

Excellent Product.

This is an excellent product; excellent strength and performance and worked great with guide plates. It solved our problem of breaking pushrods at high RPMS! Definitely recommend this product!!

Most Liked Negative Review

1.0

NOT FOR USE WITH HARDENED GUIDE PLATES

43 miles and these are completely shot metal filings everywhere. They are c1010 steel not 4340 do not buy them if your using guide plates

Filter by Ratings

Sort Reviews

NOT FOR USE WITH HARDENED GUIDE PLATES

1.0

4 months ago

Jared

Verified

43 miles and these are completely shot metal filings everywhere. They are c1010 steel not 4340 do not buy them if your using guide plates

Product was boxed,wrapped very good. Surface rust on some.

2.0

4 months ago

Sid

Florida

Verified

Hope they're ok.

Would Recommend

I was supposed to get $20 off but I didn't. I

5.0

8 months ago

Hot rodder

Some little town

Verified

Haven't put them in yet

Would buy again.

5.0

a year ago

Mark

Harrisburg Pa

Verified

Great price and accurate info.

Would Recommend

Yes I would buy this product again

5.0

a year ago

Skipper

Defuniak Springs fl

Verified

Perfect fit. Great quality

Would Recommend

I would buy again

4.0

2 years ago

Wednesday

Franklin in

Verified

Real tough

Would Recommend

I would definitely buy this product again worked great

5.0

2 years ago

Moose

Malfa, Virginia, Virginia

Verified

The best thing was they went right in like they belong in the engine. Everything bolted up crate couldn't ask for anything better. It also arrived promptly on time.

Would Recommend

They are push rods how much can you say about them.

5.0

3 years ago

Calif

Verified

Used In Sbc

Would Recommend

So far all good

5.0

4 years ago

Mayohog

Florida

Verified

Fit as they should

Would Recommend

Great just great Dustin was very helpful.

5.0

5 years ago

Mn.

Verified

Very happy with service

Would Recommend

Load More Reviews

Showing 10 of 36 reviews

Questions & Answers

5 Questions • 5 Answers

Sort Questions

Can these hand 6500 rpm in a circle track car

by Isaiah

• 7 years ago

1 answer

View Answer

Does these work with Flo-Tek 102505 heads and #57523501 rocker arms? Engine is a sbc 327.

by nicolai

• 8 years ago

1 answer

View Answer

What's manleys actual part number on these

by Bill

• 10 years ago

1 answer

View Answer

Can these be used without guide plates?

by Stretch

• 11 years ago

1 answer

View Answer

What is the overall length of these push rods

• 14 years ago

1 answer

View Answer

5 of 5 questions shown