Magnuson Superchargers 01-26-59-013-BL LS7 TVS2650R Racing Pack

#79859013

Magnuson Superchargers 01-26-59-013-BL LS7 TVS2650R Racing Pack

Magnuson TVS2650 Supercharger system complete with LS7 specific lower manifold, intercooler and drive system
Includes NHRA approved TVS2650 rotors #60-20-00-015 with Eaton TVS(r) Technology.
Designed to fit under the hood of 2015+ COPO CAMARO 350SC (hood modifications may be required for other vehicle applications)

$9,395.00

In Stock

Order soon, only 1 left in stock!

Quantity

Need Help? Call to Order

Add to a list

Select an engine to verify Fitment

Select Engine

Product Summary

Black Powdercoated, Pulley Included, Black

Magnuson TVS2650 Supercharger system complete with LS7 specific lower manifold, intercooler and drive system
Includes NHRA approved TVS2650 rotors #60-20-00-015 with Eaton TVS(r) Technology.
Designed to fit under the hood of 2015+ COPO CAMARO 350SC (hood modifications may be required for other vehicle applications)
Port injection fuel system with hard anodized, extruded aluminum fuel rails with ½” thru bore and standard short body (LS9 style) 80-lb/hour injectors
Capable of supporting 1,000+HP applications

See more details

Key Specs

MFG. Part #	01-26-59-013-BL
Brand	Magnuson Superchargers

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Magnuson Superchargers 01-26-59-013-BL Details

Magnuson’s largest and most efficient supercharger yet, the TVS2650 ‘Mag Drag’ kit for LS7 engine application. This jackshaft-based system is geared for your high horsepower race applications capable of up to 1,500HP with appropriate engine modifications. All components meet the NHRA’s 2019 Technical Specifications for Chevrolet engines used in FS/S and FS/XX divisions

Magnuson TVS2650 Supercharger system complete with LS7 specific lower manifold, intercooler and drive system
Includes NHRA approved TVS2650 rotors #60-20-00-015 with Eaton TVS(r) Technology. High helix, four-lobe rotors for maximum supercharger efficiency across the entire speed range
Patent-pending Supercharger housing designed to deliver huge airflow at high engine speeds for maximum horsepower levels
Designed to fit under the hood of 2015+ COPO CAMARO 350SC (hood modifications may be required for other vehicle applications)
Low maintenance cartridge style jackshaft system with high torque/low inertia carbon fiber driveshaft
High flow charge air cooler and massive 1-inch (-16ORB) ports reduce coolant restriction allowing maximum flow with extremely high cooling efficiency. The coolant ports accept most aftermarket fittings, allowing endless customizability
High flow inlet duct designed for 109mm mechanical throttle body or electronic throttle with GM LT5 bolt pattern. Works with Magnuson’s 109mm mechanical throttle body #98-05-40-007 as used on the 2019MY COPO Camaro available here
Port injection fuel system with hard anodized, extruded aluminum fuel rails with ½” thru bore and standard short body (LS9 style) 80-lb/hour injectors. Capable of supporting 1,000+HP applications
Two-piece 91mm (3.590 inch) front 10-rib pulley with interchangeable rear cog belt system allowing for drive ratio optimization. Supplied with standard 32 and 34 tooth cogs for up to 6% overdrive of front pulley. Optional NHRA approved 85mm (3.350 inch) #57-03-10-085-BL also available here
Fast response, vacuum bypass system designed to unload supercharger at engine idle speeds and allow intercooled air to be recirculated through the supercharger for rapid cool down

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Magnuson Superchargers 01-26-59-013-BL Specifications

KEY SPECS
MFG. Part #	01-26-59-013-BL
Brand	Magnuson Superchargers

GENERAL
Supercharger Finish	Black Powdercoated
Pulley Included	Yes
Pulley Style	Serpentine
Air Intake Kit Included	No
Fuel Rails Included	Yes
Fuel Pump Included	No
Crankshaft Pulley Grooves	8-groove Serpentine
Fuel Injectors Included	Yes
Wiring Harness Included	Yes
Belt Tensioner Included	No
Supercharger Model	TVS 2650
Color	Black

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.