Lightweight Hybrid Rotor for GM Metric, .810 Thick, DRP

Brake Rotor

This lightweight hybrid rotor is designed to fit a GM metric spindle. This rotor has a 5 on 5 bolt pattern with holes (0.490" I/D) for 5 on 4-3/4.

• Lightweight
• Fits GM metric spindles
•  5 on 5 bolt circle pattern
• Holes for 5 on 4 3/4" (must be drilled to matched knurl size when utilizing 5/8" studs from 5 on 5" pattern)
• 10.5" Diameter
• .810 thick
• 5/8"-11 UNC quick start studs
• Sold each
• Uses standard bearings and seals such as kit # 910-31048
• Uses dust cap # 550-2486
• Brake pad spacers # 910-41908 recommended

Bearing Spacer

• Designed to fit '79-up GM Metric spindles
• Allows your front hubs to be tight with minimal drag and side pre-load
• Easy adjust threaded sleeve and set screw ensure you'll never worry about an over-tightened front hub again

Bearings and Seal

Bearing Kit for GM #2 Metric Front (SET3/6); DRP Premium Finished

Includes:

• (1) LM67048
• (1) M12649
• Seal OD: 2.565"
• Seal ID: 1.950" (Our sealing elements are full PTFE and "stretch" over the spindle)
• Seal Width: 0.255"

 

Kit Includes

(1) Lightweight Hybrid Rotor for GM Metric, .810 Thick

(1) DRP 007 10521S 1979-Up GM Metric Spindle Pre-Load Bearing Spacers

(1) DRP 007-10581 Premium Finished GM Metric Front Bearing Kit

(1) DRP Performance Products 007 10577 Ultra Low Drag Hub Seal

(1) DRP 007-10756 Ultra Low Drag Bearing Grease Syringe, 50 Grams