Lawn Mower & Motorcycle Fuel Tank Liner Kit
- This item ships via Ground Shipping only. Expedited and Air shipping options are not available.
Fuel tank liner is easy to use and effective when the directions are followed closely. It internally seals the multitude of small leaks that often form due to age, rust or where the straps wrap around the tank. If you fix the major obvious leaks, this fuel tank liner seals the rest! Liner is resistant to gasoline, diesel fuel, alcohol and other fuels or fuel additives. It is designed to seal new or existing fuel tanks with minor leaks. Contrary to what some people will tell you, rust does form inside gas tanks. The cause is condensation and water in the fuel. Seals rust under the liner coating so it cannot flake off to plug fuel-line filters or cause additional damage. Further rusting is also reduced.
- Cleans, seals, and protects metal fuel tanks
- For use with lawn mower, motorcycle, and other small engine fuel tanks
- Takes you from start to finish with one kit!
- 1 pint of Fuel Tank Cleaner
- 1 pint of Fuel Tank Prep
- 1 pint of Fuel Tank Liner
*Cannot Ship By Air*
Tank Liner FAQ (PDF)
9101258 Tank Liner MSDS (PDF)
9101258 Tank Prep MSDS (PDF)
More Like This
Gas Tank Etch
Gas Fuel Tank Leak Repair Sealer, Quart
Gas Fuel Tank Cleaner/Prep/Liner Leak Repair Kit
Fuel Tank Prep Low VOC Acetone, 1 Pint
Fuel Tank Prep Low VOC Acetone, 1 Quart
Fuel Tank Cleaner and Prep, SF 77, 1 Quart
Fuel Tank Cleaner and Prep, 1 Pint
Q & A
Speedway Motors employee Pat O. is back with Dave's 1951 Chevy Truck project to talk about the 1947-1954 Chevy Truck EFI Fuel tank available from Speedway Motors.
Pat talks about our Tanks Inc. EFI fuel tanks.
Speedway Motors and Classic Trucks built a 1952 Chevy truck in celebration of the 65th anniversary of Speedway Motors. Check out the short video on one of the products used in the build.
How to clean and seal your old tank
The process on how to effectively winterize your fuel system in open wheel racing. This includes step by step instructions and recommended parts to use for your fuel system.
After installing the intake manifold and carbs on his 8BA, Heath P. continues on to the fuel and throttle setup. See how he mounts each part while making modifications to complete the install.
Thinking about rebuilding your fuel system but you're not sure what it entails? Click here for a comprehensive article on what to expect!