LS1/LT1 EFI Fuel Line Fitting, -6 AN Male to 3/8 Inch Female, SS

• Precision machined from 316 stainless steel
• Used for 3/8” EFI quick connect fitting on LS fuel rails and fuel filters
• Converts OEM quick connect to AN 6 for custom fuel line plumbing
• Threaded retaining cap ensures a leak free and secure connection
• Machined hex/flats provide an easy solution for tightening

Easily Adapt Stock LS Fuel System Components to Your Custom AN Fuel Lines

The popularity of the LS swap has been because of the ability to retain much of the OE components, like the intake manifold, fuel rails, and injectors, and often the factory PCM and wiring even with little work. This makes adding a 5.3 or 6.0 (among the many options) very enticing, as you’re not having to add aftermarket intake, fuel rails, computer, and other bits just to get your junkyard engine installed and fired up, reducing the cost of your LS swap. Using a few special fittings/adapters is often all that is needed to get your LS swap up and running. For the factory GM fuel system most will use aftermarket AN -6 fuel lines for their simplicity and ability to adapt to just about any frame or chassis, unlike the factory LS fuel lines you may find in the junkyard. Connecting the typical AN -6 hose ends to your LS swap’s fuel rail and/or fuel filter are ably handled by our GM fuel line to AN fitting fuel line adapters.

Offered in 3/8-inch (shown here) and 5/16-inch versions, our LS fuel line fittings are precisely machine from 316 stainless steel for a strong, leak free connection that will not deform or be easily damaged like aluminum fittings. Dual O-ring seals ensure the LS fuel line fittings can easily handle EFI fuel system pressures, while the threaded retaining cap provides a secure installation that will not come apart until you’re ready to take the fitting apart manually. The 37-degree flared male end accepts any AN -6 37-degree flare fitting, including standard hose ends, push on hose ends, gauge adapters and the like. 

The female side of the fitting fits 3/8-inch EFI quick connect applications commonly used as a LS fuel rail adapter as well as to adapt the inlet side of common GM LS fuel filter assemblies, such as our popular LS1 style fuel filter assembly. Simply add one of our 3/8-inch EFI quick connect adapters to your LS fuel filter outlet fitting and you’ll have easy to assemble custom LS swap fuel lines for your LS swap.