JAZ Products 892-010-01 Street Rod Fuel Cell, 10 Gallon
JAZ Products 892-010-01 Street Rod Fuel Cell, 10 Gallon
Jaz Products

|

#91076050

JAZ Products 892-010-01 Street Rod Fuel Cell, 10 Gallon

  • Features a seamless, one-piece, polyethylene construction
  • Fuel cell has a 10 gallon capacity
  • Dimensions measure 24" long, 9" tall, and 12" wide
See More

Capacity:

10 Gallon

16 Gallon / 25"x17"x9"5 Gallon

$93.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, 10 gallons Capacity, 24" Overall Length

  • Features a seamless, one-piece, polyethylene construction
  • Fuel cell has a 10 gallon capacity
  • Dimensions measure 24" long, 9" tall, and 12" wide
  • Cell has one 3/8" hole pre-drilled due to the injection mold process
See more details

Key Specs

MFG. Part #892-010-01
BrandJaz Products
Capacity10 gallons
Material TypePolyethylene
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Jaz Products 892-010-01 Details

Seamless, one-piece, polyethylene fuel cell. Install your own fittings. Fuel cell has one 3/8" hole pre-drilled due to the injection mold process (located in the center of the 9" x 24" side).

Item Details

24" long, 12" wide, 9" deep

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.
CARB warning

Jaz Products 892-010-01 Specifications

KEY SPECS
MFG. Part #892-010-01
BrandJaz Products
Capacity10 gallons
Material TypePolyethylene
GENERAL
Overall Length24"
Overall Height9"
Overall Width12"
Overall Length Range24.00" to 24.99"
Overall Height Range9.00" to 9.99"
Overall Width Range12.00" to 12.99"
FinishNatural
ColorBlack
Safety Foam IncludedNo
Pickup Tube IncludedNo
Sold in QuantityEach
GTIN Code000892010019

Ratings & Reviews

4.7

12 Reviews

Overall Assessment

Customers rate our product highly for its universal design, solid construction, and reasonable price making it a cost-effective choice. It's touted as perfect for applications like street rods, Locost 7 builds, and 1930 Model A's due to its flexible fit. The fuel cell's practical usability is commended, with its ability to be installed in any direction and customized to individual requirements (i.e., cutting holes). Some customers mentioned the need to work on the fittings and filler spout, but this has not diminished their willingness to repurchase. Overall, customers highly recommend our product for its impressive functionality and value compared to competitors.

Write A Review

4.7

12 reviews

5

10

4

1

3

0

2

1

1

0

Most Liked Positive Review

5.0

Perfect for a Locost 7 Build

If you are building a 'book' chassis for a Locost 7, this cell will fit perfectly behind the rear axle. Mated with the cool Aircraft filler neck (Part # 91076510) and the pick up (part #91076320) this is almost ready to go off the bat.

Most Liked Negative Review

2.0

i would buy again

quality is good but be prepared to do some work on fittings and filler spout. Have to make your own hold down straps.

Filter by Ratings

Works for a water tank too

5.0

2 years ago

Mike

NY

Used this for a water tank on my overlanding vehicle. Works well with the right straps and fittings.

Would Recommend

Perfect for my application

5.0

4 years ago

Tony

South Carolina

Verified

I like the universal feature that the cell offers.

Would Recommend

Construction and finish looks good

5.0

6 years ago

EZ

NY

Verified

Great price and built well

I would buy this gas tank again for my next project

5.0

6 years ago

Snubnose

Minnesota

Verified

Perfect small tank for street rod.

Would Recommend

Would buy again

5.0

7 years ago

Scotty

Kingman,KS.

Verified

Worked well

Would Recommend

Good product

5.0

7 years ago

Billy

Orange, Texas

Verified

What I needed

Would Recommend

Ditto the comments for a Locost 7 build.

5.0

8 years ago

RodinNC

North Carolina

Verified

Perfect fit for my Haynes Locost 7 build. Now I just need to plumb it up.

Would Recommend

Customer review image

Perfect for a Locost 7 Build

5.0

8 years ago

Rolvotus_se7en

SLC Utah

Verified

If you are building a 'book' chassis for a Locost 7, this cell will fit perfectly behind the rear axle. Mated with the cool Aircraft filler neck (Part # 91076510) and the pick up (part #91076320) this is almost ready to go off the bat.

Would Recommend

Customer review image

reasonable and useful

4.0

10 years ago

T&L

St. Paul, MN

Verified

good size the hole in the side is not the best place to be but workable. Will buy again for many applications.

Would Recommend

I would buy this product again

5.0

14 years ago

Hot Rod

Jacksonville Florida

Verified

fuel cell fit great in the back of 1930 model A.The cell was easy to mount and install filler neck.

Would Recommend

Load More Reviews

Showing 10 of 12 reviews

Questions & Answers

12 Questions • 13 Answers

How much does the cell weight?

by Arsen

• 8 years ago

2 answers

View Answers

Can I install a fuel line under the fuel cell instead of on top for drag racing 23 T-bucket? Will the fittings seal it?

by rayfin

• 8 years ago

3 answers

View Answers

I want to do a fill tube so I can fill it through a hole in my trunk. Do you have a fill tube that extends about 6 inches up? Also do you have the connection for the fuel line? Can you pre drill the tank? Thanks

by Big Mark

• 10 years ago

1 answer

View Answer

I purchase this tank along with the Classic fuel sending unit. How who you suggest mounting the sending unit and getting a good seal. I know I have to cut a hole but method of attachment & sealing elude me.

by Michael

• 10 years ago

1 answer

View Answer

How would I go about plugging the hole in the 9x24 side? Is there enough room to mount a remote filler on the top left between the mounting strap and the side of the cell? Also are the dimensions of the cell rounded up or rounded down (as in it actually measures 23 15/16 but they round up to 24 or its actually 24 1/8 and they round down to 24)?

by Rob

• 11 years ago

1 answer

View Answer

how to install the fuel cap , bolts up or down, how to vent it, can i use your rollover vent as a vent , and pipe it out side, battery box is right next to tank.

by Bussie

• 14 years ago

1 answer

View Answer

On a 27 t bucket where would you recommend mounting this fuel cell or is there another I could use

by

• 14 years ago

1 answer

View Answer

It was mentioned that the hole was drilled "in the side, in the center". Which side? For instance the 16 gallon tank is 25" long 17" wide 9" deep On which side is it drilled?

by

• 15 years ago

1 answer

View Answer

if I mount this tank below deck what would I use for a filler?

by dopey

• 15 years ago

1 answer

View Answer

does this come with a cap or do i need to buy the red assembly

by

• 15 years ago

1 answer

View Answer

Load More Questions

10 of 12 questions shown

Customer Impersonation Script