Ididit 2.5 In. Steering Column Drop & 2 In. Band Swivel Mount

Column Drop

As featured on Classic Truck’s Week to Wicked. Watch the transformation here!

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction.

• For tilt column
• 2 Inch diameter hole
• 2-1/2 Inch drop
• Two screws on either side will detach to slide your column through
• Polished aluminum construction
• Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

Lower Mount

Mounting your steering column to the firewall or floor can be a real challenge. Ididit's steel band swivels are an easy and inexpensive solution.

446-4030 Instructions (PDF)

Lower Mount

• Overall length of the flange is 5-7/8"
• Distance between flanges 2-1/4"
• Assembled Height is 1-1/2"
• Flange is 1/8" thick
• Each mounting surface is 1" x 2"