Holley Sniper 19-380 Fuel Cell EFI Pump Module Assy. Return Style

Updating your racing fuel system to EFI is so simple!

Sniper is introducing their latest Diecast Fuel Cell EFI Pump Modules. The modules were designed to drop in as a direct replacement for your existing 6 or 12 bolt flange fuel cell cap assembly. The diecast aluminum top flange includes a -6 AN inlet port, a -6 AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5" to 11" deep. The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs.

The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.

Features:

• Update your fuel cell to EFI the easy way!
• Designed to drop right into your existing 6 or 12 bolt flange fuel cell
• Diecast aluminum top flange housing includes a -6 AN inlet and -6 AN outlet port and a fuel filler cap
• The pump depth is fully adjustable for fitment in the most popular cell sizes 7.5”-12” deep.
• The EFI modules are available with single 340 LPH fuel pumps in both return and returnless system designs
• Bolt pattern is 5.375"
• E85 Compatible

Notes:

***Assembly fits common RJS, Jaz, Speedway, RCI, Speedmaster, Summit, and Jegs fuel cells.

***Supports up to 700 EFI or 900 Carb HP (HP Rating @ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

*** EFI rated fuel hose and clamps required when connecting to existing vehicle fuel lines.

Installation Instructions (PDF)