-19%
-19%
|
#7202085
$57.99
/each
In Stock
$72.24
Save $14.25
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1" Overall Thickness, Aluminum
| MFG. Part # | 7202085 |
| Brand | Speedway Motors |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Overall Thickness | 1" |
| Material Type | Aluminum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyBolt on performance gains with this Holley Aluminum 1 Inch Carburetor Spacer. Improved low-end torque and throttle response. Boost performance and driveability for all major 4150/4160 style carburetors such as Holley, Demon, Edelbrock, etc. 4-hole tapered design, ports taper from 1.65" to 1.71". Comes with gaskets and mount studs for a smooth install.
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 7202085 |
| Brand | Speedway Motors |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Overall Thickness | 1" |
| Material Type | Aluminum |
| GENERAL | |
| Carburetor Spacer Style | 4-Hole |
| Sold in Quantity | Each |
| Gasket(s) Included | Yes |
| Hardware Included | Yes |
4.5
15 Reviews
The product has been highly acclaimed by customers for its perfect fit and functional use. It has especially won praise for its solid structure compared to competitors, with added features such as base gaskets, new studs, and nuts deemed as bonuses. Ensuring great adaptability for various carb or fuel plates to optional intake manifolds is another highlight, with a lauded vacuum port in the side of the plate block. Customers are satisfied with the product's performance, noting its practicality on a range of vehicles. Though some minor alterations were required during installation, the consensus is that the product offers good value for money and is significantly distinguished in terms of quality.
4.5
15 reviews
5
10
4
4
3
0
2
0
1
1
Most Liked Positive Review
4.0
Pretty good value for the money
Bought this one because it is a solid spacer not like some of the others I've seen. When I got it I didn't realize it also came with the base gaskets and new studs with the nuts, definitely an added bonus so thank you Speedway! The only drawbacks are the studs were too long and I had to drill out the bolt holes to get it to fit easier over the studs.
Most Liked Negative Review
1.0
part received was poor quality at mfg le
part was received and was not debutted looked like it hasd been droped several times and gaskets bent and broken box was finr so it was packed that way at mfrgt level holley supplier sent nerw gaskets but i repaired unit i could no wait pis poor job holley this would never have left my mfg shop supplier has photos i can not up load
Filter by Ratings
Well made spacer!!!
5.0
9 months ago
Simon
Phoenix, Az
Verified
Holley products are always top quality. Well designed, everything is included to install.
Would Recommend
Yes ,i would purchase this again.
5.0
3 years ago
Bo
Wirtz Va.
Verified
Perfect fit,works great.
Would Recommend
I would buy this product again if I needed to.
5.0
4 years ago
Pappyof3boys
Pittsburg CA
Verified
I am using the carb spacer on my 1932 model a .
Would Recommend
yes
5.0
5 years ago
Lee
Berlin WI
Verified
Look good,
Would Recommend
Pretty good value for the money
4.0
6 years ago
Johnnythehat
Sacramento, CA
Verified
Bought this one because it is a solid spacer not like some of the others I've seen. When I got it I didn't realize it also came with the base gaskets and new studs with the nuts, definitely an added bonus so thank you Speedway! The only drawbacks are the studs were too long and I had to drill out the bolt holes to get it to fit easier over the studs.
Would Recommend
Perfect for the application!
5.0
6 years ago
Buzz Lightyear
Hawaii, Aloha Islands
Verified
This is a perfect way to adapt different carbs or fuel injection plates to optional intake manifolds. A big plus is there's a nicely engineered vacuum port in the side of the plate block.
Would Recommend
Would probably buy again
4.0
6 years ago
Bob
Ia
Verified
Fit right. Will work good an fo the job.
Would Recommend
the spacer was just what i needed worked great thanks
5.0
6 years ago
none
tennessee
Verified
would buy again
Would Recommend
It doing great perfect for I wanted it for. Keep up the gre
5.0
6 years ago
Did
Ohio
Verified
None
Would Recommend
if i need another 4 hole spacer speedway is the place
4.0
7 years ago
grabe
port orchard wa
Verified
I'm going to use this on my bbc and machine it out at the bottom to match my dual-plane intake. this required a solid casting.
Would Recommend
Showing 10 of 15 reviews
2 Questions • 2 Answers
what is center to center of the mounting holes ?
by Jim
• a year ago
1 answer
View Answer
what is bore size in holes
by skooter
• 2 years ago
1 answer
View Answer
2 of 2 questions shown
