-11%
-11%
|
#425083870
Holley 0-83870 870 CFM Street Avenger Aluminum Carburetor
$737.95
/each
Factory Shipped
$830.95
Save $93.00
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
-11%
-11%
|
#425083870
$737.95
/each
Factory Shipped
$830.95
Save $93.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Electric |
| CFM Range | 800-899 CFM |
| CFM | 870 CFM |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHolley's Street Avenger line of carburetors has a reputation for bolt-on-and-go performance. They have great features including a quick change vacuum secondary for easy fine tuning, optimized street calibrations, four vacuum ports for all vacuum accessories, a factory preset electric choke for easy startups, built in fuel filter, and an included fuel line kit so you don't have to make multiple trips back to the parts store to get your hot rod back on the road. These carbs share all of the same features that the Street Avenger series is known for, but now with a 36% savings in weight. Being aluminum also means they will hold their shine longer! Street Avengers are ready to run right out of the box, and now they are better than ever! Saving weight optimizes every aspect of performance of your car, whether it is acceleration, braking, or handling. What better place to start than the top of your engine?
Charts
Guides & Documents
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 0-83870 |
| Brand | Holley |
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | Electric |
| CFM Range | 800-899 CFM |
| CFM | 870 CFM |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Finish | Shiny |
| Material Type | Aluminum |
| Color | Silver |
| Secondary Type | Vacuum |
| Fuel Inlet Type | Dual |
| Gasket(s) Included | Yes |
| New or Remanufactured | New |
| Throttle Linkage Type | Universal |
| Supercharged Application | No |
| GENERAL | |
| Model | 4150 |
| Booster | Down Leg |
| Emission Code | 3 |
| Throttle Bore | 1.688 inch |
| Vacuum Ports | 1 timed (spark) port, 2 full, and 1 PCV port |
| Bolt Hole Pattern | 5.160" x 5.625" |
| GTIN Code | 090127688410 |
| Sold in Quantity | Each |
1 Question • 1 Answer
I'm restoring a 70 charger with a 440 stroked to 500 producing aprox 650 hp would you recommend this model carb or another model. It will be a weekend driver with the occasional 1/4 mile race and tune at the track. I would be great full for any assistance in the purchase. Thank you James
by jimbo
• 11 years ago
1 answer
View Answer
1 of 1 questions shown