$100 Off
$100 Off
|
#425082751
Holley 0-82751 750 CFM Street HP Carburetor
$799.95
/each
Factory Shipped
$899.95
Save $100.00
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | No Choke |
| CFM Range | 700-799 CFM |
| CFM | 750 CFM |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHolley 0-82751 Details
Holley 0-82751 Details
The Street HP uses the best features from Holley's race Bred 4150 HP carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor.
- Vibratory polished for good looks
- Optimized street/strip calibration for outstanding throttle response and drivability
- Contoured venturri inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- Dual accelerator pumps for additional fuel under initial acceleration
- Dual feed fuel inlets for constant high volume fuel delivery
- Ford A/T kickdown
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Guides & Documents
CARB Warning
For use on pre-1966 vehicles only
CARB Warning
For use on pre-1966 vehicles only
Holley 0-82751 Specifications
Holley 0-82751 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 0-82751 |
| Brand | Holley |
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | No Choke |
| CFM Range | 700-799 CFM |
| CFM | 750 CFM |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Finish | Polished |
| Material Type | Aluminum |
| Color | Silver |
| Secondary Type | Mechanical |
| Fuel Inlet Type | Dual |
| Gasket(s) Included | Yes |
| New or Remanufactured | New |
| Throttle Linkage Type | Universal |
| Supercharged Application | No |
| GENERAL | |
| Model | 4150 |
| Booster | Down Leg |
| Emission Code | 3 |
| Throttle Bore | 1.688 inch |
| Venturi Diameter | 1.375 Inch |
| Bolt Hole Pattern | 5.160" x 5.625" |
| GTIN Code | 090127605844 |
| Sold in Quantity | Each |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
What jets will it have from factory and what cross over valve?
by G-rod
• 6 months ago
1 answer
View Answer
1 of 1 questions shown

