|
#9101474
$83.99
/kit
In Stock
$85.45
Save $1.46
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Firewall/Frame Position, Natural
Comes as a Kit
View Kit Components
| MFG. Part # | 9101474 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Aluminum |
| Finish | Natural |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWilwood high-volume aluminum master cylinders have the highest fluid capacity of any integral reservoir design. With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands. More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long events. With 1-7/16" of piston travel, there is plenty of margin when used with large four or six piston calipers.
An internal slosh baffle guarantees a constant fluid supply to the bore chamber during hard cornering, acceleration and braking. This unique baffle also eliminates aeration into the reservoir from return fluid that can occur during brake release and bleeding procedures.
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
Charts
| KEY SPECS | |
|---|---|
| MFG. Part # | 9101474 |
| Brand | Speedway Motors |
| Master Cylinder Bore Size | 1 Inch |
| Master Cylinder Material | Aluminum |
| Finish | Natural |
| GENERAL | |
| Position | Firewall/Frame |
| Brake System Type | Disc |
| Outlet Count | Single |
| Reservoir Type | Integral |
| Stroke | 1.43" |
| Reservoir Included | Yes |
| Number of Mounting Holes | Two |
| Reservoir Material | Aluminum |
| Reservoir Size (cu in) | 14.8 |
| Fluid Capacity | 8.2 oz. |
| Master Cylinder Cap Included | Yes |
| Hardware Included | No |
| Pushrods Included | Yes |
| Mounting Bracket Included | No |
| Outlet Fitting | 1/8"-27 NPT |
| Overall Length | 9.15" |
| Overall Width | 2.55" |
| Overall Height | 4.5" |
| Mounted Length | 5.25" |
| Centerline of Holes | 2.25" |
| Thread Pitch | 5/16"-24 |
| Thread Length | 1.88" |
| Sold in Quantity | Kit |
| Notes | 3.50" pushrod |
Be the first to ask a question.
