|
#413054
Heidts SB-054 Mustang II Stabilizer Sway Bar Kit, 47-54 Chevy Pickup
- Will fit the 1947-1954 Chevy Pickups
- 7/8" OD sway bar kit includes polyurethane mount and end-link bushings
- Can be used in conjunction with standard width lower control arms
$336.00
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Solid Sway Bar Type, Front Position, .88" Diameter
- Will fit the 1947-1954 Chevy Pickups
- 7/8" OD sway bar kit includes polyurethane mount and end-link bushings
- Can be used in conjunction with standard width lower control arms
- Designed for use with tubular arms that include end link mounting tabs
- Has a 1-1/2" straight section, 5-3/4 center of the bar to hole center, and a 4" rise
Key Specs
| MFG. Part # | SB-054 |
| Sway Bar Type | Solid |
| Position | Front |
| Diameter | .88" |
| Material Type | Steel |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHeidts SB-054 Details
Heidts SB-054 Details
These front sway bar kits from Heidts are the best quality suspension components on the market. They come complete with everything you need for a painless installation.
- For 1947-54 Chevy pickups
- Includes urethane mount and end-link bushings
- For use with tubular arms that include end link mounting tabs
- Hardware included
- Used in conjunction with standard width lower control arms
Heidts SB-054 Specifications
Heidts SB-054 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | SB-054 |
| Brand | Heidts |
| Sway Bar Type | Solid |
| Position | Front |
| Diameter | .88" |
| Material Type | Steel |
| GENERAL | |
| Centerline of Holes | 43.75" |
| Hardware Included | Yes |
| Front Sway Bar Diameter | .88" |
| Notes | 31-1/2" Straight Section, 5-3/4 center of the bar to hole center, 4" rise |
| Sold in Quantity | Each |
Ratings & Reviews
4.4
16 Reviews
Customers have found significant improvements in stability after using our sway bar. It's praised for its perfect fit, especially in vintage Chevy Trucks, with the Speedway Mustang II front end and suspension components. Many customers mentioned the convenience of an already welded-on sway bar bracket. Additionally, our sway bar is appreciated for its excellent assembly ease and the dramatic enhancement it offers to control sensitivity and turn handling. The part is well-crafted, and the included brackets draw particular praise for their easy adaptability. Some users cautioned about the need for modification during installation, suggesting that spacers and additional instructions might be needed. Overall, the product is acknowledged for its high-quality and value, with recommendations for better clarification about the necessary adapters for certain lower arms. Despite some challenges, users are very satisfied with the product's performance and express preference for our sway bar over competitors' in the market.
Ratings & Reviews
4.4
16 Reviews
Customers have found significant improvements in stability after using our sway bar. It's praised for its perfect fit, especially in vintage Chevy Trucks, with the Speedway Mustang II front end and suspension components. Many customers mentioned the convenience of an already welded-on sway bar bracket. Additionally, our sway bar is appreciated for its excellent assembly ease and the dramatic enhancement it offers to control sensitivity and turn handling. The part is well-crafted, and the included brackets draw particular praise for their easy adaptability. Some users cautioned about the need for modification during installation, suggesting that spacers and additional instructions might be needed. Overall, the product is acknowledged for its high-quality and value, with recommendations for better clarification about the necessary adapters for certain lower arms. Despite some challenges, users are very satisfied with the product's performance and express preference for our sway bar over competitors' in the market.
4.4
16 reviews
5
12
4
1
3
1
2
1
1
1
Most Liked Positive Review
5.0
Heidts high quality part and cost less t
I had to call Heidts direct for help on ordering the link adapter for a stock Mustang II lower arms. Speedway might want to state the corect adapter for either stock or tubular lower a arms. They sell both!
Most Liked Negative Review
1.0
Doesn't bolt up no directions
This sway bar has all the right bends and is nearly correct for its application with the exception that one will need to manufacture some spacing blocks for the frame bushings as without them the bar hits the frame before the bushings make contact. There are no directions included and heidts doesn't have any. They made this product without ever bolting it up and use generic products that require modifications. I know most are easily versed in modifications but when they state it will work it should work. Unless you have the ability to make spacers and figure it out on your own then stay away
Filter by Ratings
I would buy it again if needed
5.0
2 months ago
Gabe
Bakersfield,California
Verified
Worked exactly as described,tightened up the steering perfectly!
Needed for more modern handling.
4.0
5 months ago
Buddy
Berwick, Maine
Verified
Fairly straight forward project. The control arms had pre welded mounts, so mostly a bolt in project. I was surprised that there were no instructions, either from Speedway or the manufacturer, printed or pdf. My reason for 4 stars.
Would Recommend
1954 1/2 Ton
5.0
7 months ago
1954 GMC 1/2 Ton
Phx, AZ
Verified
Works well with stock lower Mustang control arm with strut and heidst stabilizer bolt on bracket.
Would Recommend
Easy to Install
5.0
11 months ago
Q
Salt Lake City, UT
Verified
Fit like a glove
Would Recommend
Yes
5.0
4 years ago
Ddd
Lincoln
Verified
Made different suspension more stable
Would Recommend
Very good
3.0
5 years ago
Mark Slaton
Sturgis Kentucky
Verified
The sway bar was very well made
Would Recommend
Fits perfectly
5.0
5 years ago
Tweeje
Kansas City
Fits perfectly in my 1954 Chevy Truck. Using Speedway Mustang II front end and suspension components where the tubular lower control arms already have the sway bar brackets welded on.
Would Recommend
good value sway bar
5.0
6 years ago
jack
leesburg ,miss
Verified
put it on a 1952 chevy 3100 just like the speedway truck
Would Recommend
Sway Bar Heidths 47-54 Chevy pickup
5.0
7 years ago
SubVet
GEORGIA
Verified
Assembly easy if you have the tubular lower control arm with bracket already welded in. Truck handles so much better in the turns and less sensitivity in steering. Im very happy with this product
Would Recommend
Fits bolt in crossmember and speedway mii kit perfectly
5.0
9 years ago
West
Tampa, FL
Verified
Fits like a glove if using speedways mii control arm kit. The front bushing mount holes line up perfectly with speedways bolt-in crossmember. just drill the rear bushing mount hole on each side and its done. took 5 minutes to install. Make sure to trim the radiator support per the crossmember directions.
Would Recommend
Showing 10 of 16 reviews
Questions & Answers
Questions & Answers
5 Questions • 7 Answers
Will this work on your narrowed tubular mustang II control arms if I weld my own bracket?
by 551st Edition LT4
• 8 years ago
1 answer
View Answer
Will this work with stock lower control arm
by Corey
• 9 years ago
1 answer
View Answer
Will this work with an air ride set up? I have a speedway mustang II crossmember, and Speedway tubular upper and lower arms (with the hole for sway bar end links). Also wondering if holes need to be drilled in the frame for the bushing mounts
by Nick
• 10 years ago
1 answer
View Answer
what is the length of this sway bar
by timsp
• 11 years ago
2 answers
View Answers
Will this work with your Speedway tubular Mustang 2 suspension
by Outlaw26
• 12 years ago
2 answers
View Answers
5 of 5 questions shown
Fitment
Fitment
1947-1952 Chevy Fleetline Truck
1947-1948 Chevy Fleetmaster Truck
1947-1954 Chevy Truck
1947-1954 GMC 100-22
1953-1954 GMC 100-24
1952-1953 GMC 102-22
1947-1954 GMC 150-22
1953-1954 GMC 150-24