|
#2896513
$123.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| MFG. Part # | Select Color |
| Brand | Speedway Motors |
| Cap Type | HEI / Male |
| Advance Type | Mechanical and Vacuum |
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, so precision adjustment is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.
Packed with design and build features, this HEI distributor offers a whole lot of bang for your buck. A CNC machined billet aluminum housing guarantees a perfect fit, plus hardened steel internals ensure stability and long-lasting performance. Its high-output ignition module and powerful 65,000-volt coil mean that you'll have everything you'll need to power you high performance engine. With adjustable mechanical and vacuum advances and a simple one-wire hookup, easy is an understatement.
Fits Chrysler small block 273, 318, 340, and 360 V8 engines. Will not fit "Magnum" engines.
Includes vacuum advance adjustment tool and instructions.
Note: Distributor gear is not included. Original distributor gear must be utilized and installed.
Charts
287-99600 Instructions (PDF)
Guides & Documents
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Color to see |
| Brand | Speedway Motors |
| Cap Type | HEI / Male |
| Advance Type | Mechanical and Vacuum |
| GENERAL | |
| External Ignition Box Required | No |
| Cap Terminal Style | HEI / Male |
| Trigger Style | Magnetic |
| Hall Effect | No |
| Sync Signal | No |
| Trigger Sensors | Single |
| Gear Material | Steel |
| Gear Rotation | Standard |
| Distributor Cap Color | Select Color to see |
| Mechanical Tach Drive | No |
| Slip Collar | No |
| Housing Material | Aluminum |
| Housing Finish | Natural |
| Marine Use | No |
| Coil Included | Yes |
| Sold in Quantity | Each |
4.9
15 Reviews
Customers highlight the high quality and affordability of our product, praising its noticeable enhancement to combustion and smooth running. Its practicality is applauded, it being an easy-to-install upgrade from point ignition systems, which fits perfectly despite its larger diameter. Users also noticed an improvement in the vehicle's performance, even on long trips. However, several reviews caution that the product's size can interfere with certain models' wiper motors and may require adjustments to the installations, underscoring its robust build but sizable dimensions. Nonetheless, the consensus remains that the product offers excellent value for the price.
4.9
15 reviews
5
14
4
1
3
0
2
0
1
0
Filter by Ratings
Fit nicely in my 1973 Charger
5.0
a month ago
celilly
Coal City, WV
Verified
Fit nicely in my 1973 Charger. Had plenty of clearance. Parked old distributor at #1 cylinder and removed it. Put new distributor in at #1 cylinder. Started car, let it warm up, set timing and good to go. This was a very nice replacement for a HEI distributor that was failing.
Would Recommend
Modern Mopar
5.0
10 months ago
Luckydog61
Nebraska
Verified
We have used about a dozen of these either in our older mopar drivers or in Demolition Derby cars. They are very easy to setup and keep running. They add reliability over the older mopar electronic ignition or points. If you are using this in a vehicle that still has the factory firewall you will more than likely have to clearance around the distributor to make enough room for it. A ball peen hammer or lightly with an air hammer does the trick.
Would Recommend
Best bang for the buck
5.0
2 years ago
Bigbird
Arriizona
Verified
Easy to use, don't forget the plug wires stock MOPAR guys. lol
Would Recommend
I would buy this product again.
5.0
2 years ago
Moparbucket
Port Charlotte Florida
Verified
It was a tight fit for my application but it's working great and was very easy to install.
Would Recommend
Great looking distributor
5.0
4 years ago
Duster/twister 1970
Brownwood tx.
Verified
Great looking, fit right in, fired right up, but i didnt realize the 1970 plymouth Duster/twister wiper motor would interfere, bummer...live and learn
Would Recommend
Perfect!
5.0
4 years ago
Fix It
Caldwell, ID
Verified
I am a happy camper!
Would Recommend
Works great!
5.0
5 years ago
Joe
Nor Cal
Verified
Its a nice quality hei for the price. It is big so be aware Dart drivers. I had to unbolt the wiring harness for the windshield wiper motor to get it in. It rubs slightly on the fire wall.
Would Recommend
Excellent distributor! What a difference!
5.0
5 years ago
Below130
Ontario Canada
Verified
The new distributor and cable installed very easily. Timing was only a tiny bit off so setup was a breeze. I've already noticed better combustion and no misses
Would Recommend
i GOT IT TO FIT - HEI IN A SMALL BLOCK DODGE CHALLENGER
5.0
5 years ago
K2STEVE
ANTIOCH, CA
Verified
THIS THING WORKS A LOT BETTER THAN WHAT I HAD, IN A 70 CHALLENGER I HAD TO MOVE THE OIL SENDING UNIT AND MODIFY THE THROTTLE LIKAGE BRACKET. THIS CAR IS A STICK SHIFT, I HAD TO REMOVE THE PART OF BRACKET THAT WOULD HAVE HAD THE KICK DOWN LINKAGE BOLTED TO IT.
Would Recommend
I would buy this again
5.0
6 years ago
Timmeh
Marysville, WA
Verified
Great product, great price!
Would Recommend
Showing 10 of 15 reviews
8 Questions • 8 Answers
Will this fit a 1960 Dodge 318 Poly engine?
by ToLoCo
• a year ago
1 answer
View Answer
I have a chrysler 1975 318 marine engine. It is a right hand engine. Will this distributor work. I believe the right hand engines had a bushing on the distributor. Thank you.
by Darrell
• 6 years ago
1 answer
View Answer
Will it work and fit a 65 plymouth fury III 318 wedge?
by Timothy
• 6 years ago
1 answer
View Answer
So i grabbed one of these hei modules. I know it says only needs a 12v however ive never done this. Can anybody tell me exactly how to do it? Putting it on a 1986 dodge d250 318. Thank you!
by Kevjunior17
• 7 years ago
1 answer
View Answer
1967 dodge gt 318 will it clear firewall
by burt
• 7 years ago
1 answer
View Answer
What the replacement cap and rotor for this distributor
by Tyler
• 8 years ago
1 answer
View Answer
Dose this need a 12v source or dose it need more.
by Wesley
• 8 years ago
1 answer
View Answer
does this set up come with a wiring clip, if not will you give me a part number please.
by chris
• 8 years ago
1 answer
View Answer
8 of 8 questions shown
