GM Metric Disc Brake Rotor & Bearing Kit, 5 on 5

#91605035

GM Metric Disc Brake Rotor & Bearing Kit, 5 on 5

Name: GM Metric Disc Brake Rotor & Bearing Kit, 5 on 5
Brand: Speedway Motors
SKU: 91605035
Price: 125.99 USD
Availability: InStock
Rating: 5 (1 reviews)

1 Review

Ask a Question

Will fit most '79+ GM spindles
Vented 10.5" diameter
5/8"-11 thread pitch

$125.99

/kit

In Stock

$128.56

Save $2.57

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Front Position, Round Rotor Shape, Vented Rotor Type

Will fit most '79+ GM spindles
Vented 10.5" diameter
5/8"-11 thread pitch
Ideal for dirt track applications
IMCA Approved

Comes as a Kit

View Kit Components

See more details

Key Specs

Rotor Diameter	10.50 Inch
Rotor Style	Plain Face
Rotor Material Type	Cast Iron
Rotor Thickness	1"
Bolt Pattern	5 on 5"

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Installation Details

Installation Tips

Proper Break-In Procedure for Steel or Cast Iron Rotors

New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.

Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage.

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Speedway Motors 91605035 Details

Kit Includes:

(1) GM Metric Stock Car Disc Brake Rotor
(1) Metric Spindle Replacement Inner Seal
(1) Metric Spindle Chassis Outer Wheel Bearing
(1) Metric Spindle Tapered Inner Wheel Bearing

GM Metric Stock Car Disc Brake Rotor

This 1979-up GM Metric front disc brake rotor will work with a Set # 6 inner bearing/race which fits most spindles. 5 on 5" with 5/8" coarse studs installed. 10.5" diameter x 1". Must be used with 912-TS3 outer bearings for 1982-1987 spindle applications. IMCA Approved.

This is a 1979-1981 Metric GM rotor with the bolt pattern changed to 5 on 5". It can be used on 1982-1987 GM metric spindles if the you use our bearing/seal kit 91031048, or use at least the 1979-1981 style outer bearing 912TS3.

Position: Front
Rotor Shape: Round
Rotor Diameter: 10.50 Inch
Rotor Type: Vented
Rotor Style: Plain Face
Rotor Material Type: Cast Iron
Rotor Finish: Natural
Rotor Thickness: 1"
Bolt Pattern: 5 on 5"
Stud Length: 2.32"
Stud Diameter: 0.63"
Thread Pitch: 5/8"-11
Notes: Designed for dirt track applications.

Metric Chassis Replacement Inner Seal

Overall Thickness: .23"
Inside Diameter: 2.00"
Outside Diameter: 2.56"

Metric Spindle Chassis Outer Wheel Bearing

Replacement outer wheel bearing for 1975-1981 Ford Granada style rotors. Includes M12649 outer bearing cone, M12610 outer bearing cup.

Overall Diameter: 1.969"
Diameter Big End: 1.681"
Diameter Small End: 1.494"
Overall Width: .720"
Race Included: Yes

Metric Spindle Chassis Outer Wheel Bearing

Includes 912TLM67048 outer bearing cone, 912TLM67010 outer bearing cup.

Cone ID: 1.245"
Cup OD: 2.33"
Race Included: Yes
Material Type: Steel
Inside Diameter: 1.25"
Outside Diameter: 2.33"

Speedway Motors 91605035 Specifications

KEY SPECS
MFG. Part #	91605035
Brand	Speedway Motors
Rotor Diameter	10.50 Inch
Rotor Style	Plain Face
Rotor Material Type	Cast Iron
Rotor Thickness	1"
Bolt Pattern	5 on 5"

GENERAL
Position	Front
Rotor Shape	Round
Rotor Type	Vented
Rotor Finish	Plain
Stud Length	2.32"
Stud Diameter	0.63"
Thread Pitch	5/8"-11
Sold in Quantity	Kit

Ratings & Reviews

1 Review

Write A Review

1 reviews

Filter by Ratings

Sort Reviews

Yes

5.0

2 years ago

Hotrod

Kansas

Verified

Excellent fit thanks

Showing 1 of 1 reviews

Questions & Answers

Be the first to ask a question.