Front Frame Leaf Spring Perch Kit, Low Ride Height
Front Frame Leaf Spring Perch Kit, Low Ride Height
Speedway Motors

|

#91633015

Front Frame Leaf Spring Perch Kit, Low Ride Height

  • Welds to 3" diameter cross tube
  • Plain U-bolts included
  • For 1 3/4" wide spring
See More

Ride Height:

Low

Standard

$64.99

/kit

In Stock

$65.98

Save $0.99


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit

  • Welds to 3" diameter cross tube
  • Plain U-bolts included
  • For 1 3/4" wide spring
  • Low ride height perch drops chassis 1 1/2" lower then standard perch
  • Front perch is just what you need to install one of our transverse front leaf spring suspension kits

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #91633015
BrandSpeedway Motors
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91633015 Details

This front spring perch kit welds to a 3" diameter crossmember tube and works with a 1-3/4" wide leaf spring. The "low ride height" perch kit has an additional 1-1/2" of drop over the "standard height" perch kit.

Includes plain steel U-bolts.

Speedway Motors 91633015 Specifications

KEY SPECS
MFG. Part #91633015
BrandSpeedway Motors

Ratings & Reviews

4.8

21 Reviews

Overall Assessment

Customers appreciate the product for its ease of use, practical functionality, and quality build - particularly for hot rod and rat rod projects. Many have repurchased it for new projects, with the amid process being simple: center, set the angle, and weld. The product is highly rated for its perfect fit onto a 3in round tube and for front suspension, claiming it's impossible to build the part cheaper than its purchase price. The product compatibly allows placement as desired, with only minor welding required to secure it. Consequently, customers favor our product over others for its undeniably superior qualities.

Write A Review

4.8

21 reviews

5

18

4

2

3

1

2

0

1

0

Most Liked Positive Review

5.0

Get Down!

Beats cutting your own

Most Liked Negative Review

3.0

Had to trim for square tube, worked good anyway..

Good stuff

Filter by Ratings

I hope never to have to buy one again but would in a minute

5.0

6 months ago

Gene

Cedar Rapids Iowa

Verified

The front frame perch kit is great . Very nice bends . Craftsmanship is spot on .

Would Recommend

Great mount

5.0

2 years ago

Scott

Surprise AZ

Verified

Perfect spring mount , I cut off the round mount a little bit so I could weld it to a flat crossmember so it made it easy , saves slot of time rather than building your own and it came with the spring u bolts .

Would Recommend

great quality

5.0

2 years ago

bh

el paso Texas

ordered for a spring behind axle kit. great quality. I need to customize mine since I'm not using round tube.

Would Recommend

I would buy this again.

5.0

3 years ago

Lu

Lares,PR

Verified

Speedway make it easy for you to build your hot rod or rat rod with this part.

Would Recommend

Fit great

5.0

4 years ago

Don

Lubbock

Verified

Worked well for it's intended purpose

Would Recommend

I would buy again

4.0

5 years ago

guilld

white house tn

Verified

New project

Would Recommend

Looks great.

5.0

6 years ago

Rob

Hillsboro Il.

Verified

Well made.

Would Recommend

Low Ride

5.0

7 years ago

Cml

Santa Clarita ca

Verified

Mounting in a Willy's suicide spring behind set up

Would Recommend

Going Suicide? This is it...

5.0

7 years ago

Peltonen the swed

Vankiva Sweden

Verified

This is one of the best way to easy install a Suicide axle. Weld it into a round 3" steel member. Fits a traditional transverse spring or a mono Leaf. This is HOT ROD

Would Recommend

nice and clean just weld on and go

5.0

7 years ago

dpc

ohio

Verified

great priced nice part

Would Recommend

Load More Reviews

Showing 10 of 21 reviews

Questions & Answers

5 Questions • 5 Answers

I just bought this low ride kit I know when welded to the frame it can be at 5 dergrees but is that on the full weight of the car or then sitting on the frame thanks

by rich

• 10 years ago

1 answer

View Answer

what degree do you have to have this at or should the axle be straight up and down I made my own frame and using a 1930 ford axle and I heard that the axle has to have a 4 degree angle thanks

by scooby

• 11 years ago

1 answer

View Answer

How thick is the steel?

by spareparts22

• 13 years ago

1 answer

View Answer

Hi Guys! Just like to know about how much drop this piece gives as opposed to the standard height piece.I Have 1 of your late 1980's T frames, need to go a bit lower. Thanks Much!

by Artie

• 14 years ago

1 answer

View Answer

Does this product come with the U-Bolts?

by Reds

• 15 years ago

1 answer

View Answer

5 of 5 questions shown

Customer Impersonation Script